Table of Contents
Advertisement
Table 3-1. SE4400 Technical Specifications at 23° C (Continued)
Item
Illumination Element
Light Emitting Diode (LED)
Total LED Output Power
Pattern Angle
Shock
Vibration
ESD
Laser Class
Temperature
Operating
Storage
Humidity
Operating
Storage
Height
Width
Depth
Weight
Electrical Interface
635 nm ± 20 nm
Less than 10 mW
50º (FWHM)
2000 ± 5% G applied via any mounting surface at -20º, 20º
and 55º C for a period of 0.9 ± 10% msec
Unpowered SE4400 withstands a random vibration along
each of the X, Y and Z axes for a period of one hour per axis
(6 G rms), defined as follows:
20 to 80 Hz
Ramp up to 0.04 G
3dB/octave
80 to 350 Hz
0.04 G
350 to 2000 Hz
Ramp down at the rate of 3 dB/octave
± 500 V (pin injection)
The engine, by itself, is an unclassified component. It is
intended for use in CDRH Class II/IEC Class 1 devices with
proper housing, labeling, and instructions to comply with
federal and/or international standards.
-20º to 55º C (-4º to 131º F)
-40º to 70º C (-40º to 158ºF)
95% RH, non-condensing at 60º C
85% RH, non-condensing at 70º C
0.46 in. (11.8 mm) maximum
0.85 in. (21.5 mm) maximum
0.64 in. (16.3 mm) maximum
0.29 oz. (8.3 grams)
31 pin 0.3 mm pitch ZIF connector (refer to
Electrical Interface
for more information.)
SE4400 Specifications
Description
2
/Hz at the rate of
2
/Hz
Chapter 4,
3-3
Advertisement
Table of Contents
