Chapter 4. Electrical Interface; Overview; Se4400 - Motorola Symbol SE4400 Integration Manual

Overview

The SE4400 has one 31-pin connector. See
on the side opposite the aiming/illumination system.

SE4400

Table 4-1 lists the pins and signals of the 31-pin connector on the SE4400.
Pin
Number
1 GND
2 PCLK
3 GND
4 HREF
5 VCC_MOTOR
6 VCC_ILLUM
7 REG_RESET*
8 VCC
9 VCC
Chapter 4
Electrical Interface
Table 4-1. SE4400 Signal Information
SE4400 Signal
Name
Figure 2-1 on page 2-3
I/O
Pwr Ground
O Pixel Clock
Pwr Ground
O Horizontal Pixel Valid Clock (Sync)
Pwr Focus Control Motor Power
Pwr Illumination Power
2
I/O I C Register Reset Pin
Pwr CCD/Aiming Power
Pwr CCD/Aiming Power
for the pin one location,
Note
4-1