To Set Ta Function - Sony XES Operating Instructions Manual

Listening to the Radio
Useful tips
You can also set the
volume level for the
traffic announcements
by holding down the
TA button on the
Display Section for
about 2 seconds. TA
VOL indication appears
momentarily and the
current volume level is
memorised.
46
Listening to the Radio

To Set TA Function

1
While listening to an FM broadcast, press
MENU.
2
Select "RDS," then press / to move to the
sub menu, then select "TA" using > or ..
Set up
RDS " AF
R.Mode TA
Source
TIR Mode
Exit Regional
CT
3
Press /, then > or . to select TA mode item,
then ENTER.
The selected item appears to the right of "TA" in the
display.
Indication Operation
on Turns the TA function on.
off Turns the TA function off.
Vol MEM Memorises the current volume level for
listening to the traffic announcements.
Whenever a traffic announcement starts while
you are listening to the radio, the memorised
volume level is applied automatically. Note
that this setting applies to both the TA and
TIR functions.
Receiving emergency announcements
If an emergency announcement is broadcast while you are
listening to the radio, the system will automatically switch
to the announcement. If you are listening to a source other
than the radio, the system will play the emergency
announcements if you have set AF or TA to on. With this
setting, the system will automatically switch to these
announcements no matter what you are listening to at the
time.
on
on" on
on off
on Vol MEM
on