Sony XES Operating Instructions Manual page 56

Additional Settings
54
Additional Settings
Sub menu item Function
MW/LW Set to "off" to eliminate MW and LW from the
source.
AUX Digital Set to "on" when a Sony product that does not
support the audio bus connection or a non-
Sony component (e.g., a CD or MD player) is
connected to the digital input connector of the
system. When set to "on," the "AUX Digital
Audio" indication appears when you press
the SOURCE button on the rotary remote or
the wireless remote.
AUX Analog Set to "on" when a Sony product that does not
support the audio bus connection or a non-
Sony component (e.g., a CD or MD player) is
connected to the analogue input connectors of
the system. When set to "on," the "AUX
Analog Audio" indication appears when you
press the SOURCE button on the rotary
remote or the wireless remote.
GND floating Selects the ground setting when "AUX
Analog" is set to "on." When set to "off," the
control panel and the CD changer/pre-
amplifier share a common ground; when set
to "on," they are grounded separately.
Remote in When the AMP REM connector of an external
component is connected to the REM IN (AUX)
connector of the system, the programme
source automatically switches to AUX when
the connected component is turned on. When
both "AUX Digital" and "AUX Analog" are
set to "on," set this item to "digital" or
"analog" to specify the source signal input
connector (external component) when a
control signal is detected at the REM IN
(AUX) connector.
To switch to the other programme source,
press the SOURCE button on the rotary
remote or the wireless remote.