Table of Contents
Advertisement
LOCATION AND FUNCTION OF PARTS AND CONTROLS
FRONT PANEL
0
POWER button
Press to turn on the power of the player.
To turn off the power, press the button again.
@
OPEN button
Press to open the disc compartment lid for insertion or
removal of the video disc.
E)
COMMAND SENSOR
The red COMMAND SENSOR lamp will blink to show that
the player detects that a key of the control unit has been
pressed.
0
RELEASE button
Press this button while detaching the control unit.
6
Indicating lamps
Control unit
REMOTE jack
,
Antenna selector
PHONES jack
RELEASE button
COMMAND SENSOR
0
PHONES jack
Connect headphones here to monitor the audio.
0
Antenna selector
This selector selects the picture on the monitor screen.
When you want to watch the program from the disc, set this
selector to VDP. When you want to watch the TV program
from the antenna, set this selector to
ANT.
0
REMOTE jack (special mini jack)
Connect to the remote jack on the control unit with the
remote cable when the control unit is to be used as a wired
remote commander.
Advertisement
Table of Contents
