Sony SCD XA5400ES Operating Instructions Manual

Sony SCD XA5400ES Operating Instructions Manual

Super audio cd player
Table of Contents

Advertisement

Available languages

Available languages

Quick Links

Super Audio
CD Player
SCD-XA5400ES
©2008 Sony Corporation
4-000-691-12(1)
Operating Instructions
Mode d'emploi
GB
FR

Advertisement

Table of Contents
loading

Summary of Contents for Sony SCD XA5400ES

  • Page 1 Super Audio CD Player SCD-XA5400ES ©2008 Sony Corporation 4-000-691-12(1) Operating Instructions Mode d’emploi...
  • Page 2: Important Safety Instructions

    The model and serial numbers are located on the rear of the unit. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. SCD-XA5400ES Serial No.
  • Page 3 EU directives The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku, Tokyo, 108- 0075 Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany.
  • Page 4 natural resources. In case of products that for safety, performance or data integrity reasons require a permanent connection with an incorporated battery, this battery should be replaced by qualified service staff only. To ensure that the battery will be treated properly, hand over the product at end-of-life to the applicable collection point for the recycling of electrical and electronic equipment.
  • Page 5: Table Of Contents

    Table of Contents Features of the player ...6 Compatible Disc Types ...7 About the Super Audio CD ...8 Getting Started Descriptions of Parts and Controls ...9 Hooking Up the Analog Audio Components ...12 Hooking Up the Digital Audio Components ...13 Setting the output signal ...15 Setting the playback area of Super Audio CDs to be given priority ...18 Playing Discs...
  • Page 6: Features Of The Player

    HDMI cable with higher quality sound. H.A.T.S. (High quality digital Audio Transmission System) • By connecting the player to Sony STR- DA6400ES amplifiers (for the U.S. and Canada), or STR-DA5400ES amplifiers (for Europe) by HDMI, you can listen with higher fidelity.
  • Page 7: Compatible Disc Types

    Compatible Disc Types You can play the following types of discs on this player. • Super Audio CDs • Audio CDs • DSD Discs This player cannot play the following discs. • CD-ROMs (MP3, JPEG, etc.) • DVDs • DTS-CDs •...
  • Page 8: About The Super Audio Cd

    About the Super Audio CD Super Audio CD is a new high-quality audio disc standard where music is recorded in the DSD (Direct Stream Digital) format (conventional CDs are recorded in the PCM format). The DSD format, using a sampling frequency 64 times higher than that of a conventional CD, and with 1-bit quantization, achieves both a wide frequency range and a wide...
  • Page 9: Getting Started

    Getting Started Descriptions of Parts and Controls Further details are provided on the pages indicated in parentheses. Instructions in this manual describe the controls on the player. You can also use the controls on the remote if they have the same or similar names as those on the player. Front Panel A ?/1 (power) switch (19) Turns the power of the player on or off.
  • Page 10: Rear Panel

    Rear Panel A IR REMOTE IN jack Equipped on the models for the U.S. and Canada only. Connects an IR repeater. B ANALOG OUT BALANCED L/R jacks (13) Connects a component with XLR input jacks, such as stereo amplifiers, etc., using an XLR (balanced) cable (not supplied).
  • Page 11 Remote A ?/1 (power) switch (19) Turns the power of the player on or off. To let the player enter power-saving mode (standby mode), press \/1 (power) on the remote or on the player. B SA-CD/CD button (24) Switches between the Super Audio CD layer and the CD layer of a hybrid disc.
  • Page 12: Hooking Up The Analog Audio Components

    Under normal conditions, the batteries should last for about 6 months. When the remote no longer operates the player, replace both batteries with new ones. Notes • Do not leave the remote in an extremely hot or a humid place. •...
  • Page 13: Hooking Up The Digital Audio Components

    Connecting a component with BALANCED input jacks Use XLR (balanced) cables (not supplied). XLR (balanced) cable (not supplied) 2: HOT (+) 3: COLD (-) 1: GROUND To XLR input jacks (L/R) on a stereo amplifier, etc. Note The XLR (balanced) cable is locked, therefore, cannot be disconnected, even if it is pulled.
  • Page 14 Notes • It is recommended to use an HDMI cable of category 2 to connect the player. • The HDMI OUT jack of the player outputs only the blue signal as video. It does not output any other video signals. •...
  • Page 15: Setting The Output Signal

    lead) is inserted firmly. The cord is supposed be connected this way. This is not a malfunction. When you connect the power cord, you may hear relay action noise from inside of the player for a short time, even if the player is not turned on.
  • Page 16 Setting the digital signal output of CDs You can set whether audio signals are output from the DIGITAL OUT (CD) jacks or not. This setting is effective in the HDMI OFF mode. In the HDMI ON mode, no sound is output from the DIGITAL OUT (CD) jacks, irrespective of the DIGITAL OUT (CD) switch setting.
  • Page 17 Signals output The signals output from each output jack vary according to the setting of the HDMI button and the DIGITAL OUT (CD) switch on the back panel. 2-channel audio of Super Audio CDs and CDs : Outputs audio signals. : Does not output audio signals.
  • Page 18: Setting The Playback Area Of Super Audio Cds To Be Given Priority

    Setting the playback area of Super Audio CDs to be given priority When both a 2-channel area and a multi-channel area are recorded on the Super Audio CD layer, and the sound is output via HDMI, you can set the playback area that is automatically selected for playback.
  • Page 19: Playing Discs

    Playing Discs Playing a Disc The basic operations are explained below. HDMI A N X AMS ./ > Turn on the amplifier. Turn down the volume level to the lowest. Select the player position using the input selector on the amplifier. Press on the player to turn on the player.
  • Page 20: Using The Display

    Using the Display The display shows information about the disc or track being played. This section describes the current disc information and information that appears for each status of the player. Display TIME/TEXT TIME/TEXT DISPLAY Disc information when a disc is loaded The display shows the total number of tracks and total playing time.
  • Page 21 While playing a disc Press TIME/TEXT repeatedly. Playing time of the current track Remaining time of the current track Elapsed time of the disc Remaining time of the disc Track title* * When there is no track title, “NO TEXT” appears.
  • Page 22: Locating A Track Directly

    Locating a Track Directly — Direct track selection You can select a track before you start playback. Press the number button(s) to enter the track number, and press ENTER. For example, • to select the 8th track: 8 t ENTER •...
  • Page 23: Playing Tracks Repeatedly

    Playing Tracks Repeatedly — Repeat Play You can play an entire disc or a specific track repeatedly. This function can be used with Shuffle Play to repeat all the tracks in random order (page 23). CLEAR Press REPEAT on the remote repeatedly until “REPEAT”...
  • Page 24: Selecting The Playback Layer

    Selecting the Playback Layer When playing a hybrid disc with a Super Audio CD layer and a CD layer (page 8), the player plays the Super Audio CD layer automatically. You can select the CD layer. SA-CD/CD SA-CD/CD Press SA-CD/CD in stop mode. “SA-CD”...
  • Page 25: Playing A Dsd Disc

    Playing a DSD Disc This player can play discs that you recorded in DSF file format using a computer, etc. Requirements for playable DSF files DSF files must satisfy following conditions to be played on this player correctly. • Disc: DVD-R, DVD-RW, DVD+R, and DVD+RW, that are compatible with DVD- ROM specifications •...
  • Page 26: Additional Information

    Display When you press TIME/TEXT during playback, the display shows: Album number/track number/elapsed time of the track File name Total number of albums appears in stop mode. Additional Information Precautions On safety • Caution – The use of optical instruments with this product will increase eye hazard.
  • Page 27: Notes On Discs

    Super Audio CD. If you have any questions or problems concerning your player, please consult your nearest Sony dealer. Notes on Discs On handling discs • To keep the disc clean, handle the disc by its edge.
  • Page 28: Troubleshooting

    Should any problem persist, consult your nearest Sony dealer. The disc does not play. • There is no disc inside the player. • Place the disc on the disc tray with the label side •...
  • Page 29: Specifications

    No video is output from the HDMI OUT jack. • The HDMI OUT jack of the player outputs blue signal in the NTSC system only. It does not output any other video signal. No sound is heard, and “Unmatched Sink” appears on the display.
  • Page 30 General Laser Diode Properties Power requirements Power consumption Power consumption (during standby mode) Dimensions (w/h/d) Mass (approx.) Supplied accessories Audio connecting cord Remote commander AC power cord Battery Design and specifications are subject to change without notice. • Halogenated flame retardants are not used in the printed wiring boards.
  • Page 31: Index

    Additional Information Index AC power cord 14 AMS (Automatic Music Sensor) 19 ANALOG OUT 12 Batteries 11 Channel areas of Super Audio CDs 8 Connecting cable Audio connecting cord 12 Coaxial digital cable 14 HDMI cable 13 Optical digital cable 14 XLR (balanced) cable 13 Connection Analog audio components 12...
  • Page 32 Le fabricant de ce produit est Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-0075 Japon. Le représentant autorisé pour les questions de compatibilité électromagnétique (EMC) et la sécurité...
  • Page 33 Elimination des piles et accumulateurs usagés (Applicable dans les pays de l’Union Européenne et aux autres pays européens disposant de systèmes de collecte sélective Ce symbole, apposé sur les piles et accumulateurs ou sur les emballages, indique que les piles et accumulateurs fournis avec ce produit ne doivent pas être traités comme de simples déchets ménagers.
  • Page 34 Table des matières Caractéristiques du lecteur ... 5 Disques compatibles... 6 A propos du Super Audio CD ... 7 Mise en service Nomenclature ... 8 Connexion des composants audio analogiques ... 11 Connexion des composants audio numériques...12 Réglage du signal de sortie... 14 Réglage de la zone du Super Audio CD à...
  • Page 35: Caractéristiques Du Lecteur

    H.A.T.S. (High quality digital Audio Transmission System) • En raccordant le lecteur à un amplificateur Sony STR-DA6400ES (aux États-Unis et au Canada), ou à un ampli STR-DA5400ES (en Europe) via HDMI, vous obtenez une qualité d’écoute supérieure. • La fonction H.A.T.S. fonctionne uniquement avec les amplificateurs AV raccordé...
  • Page 36: Disques Compatibles

    Disques compatibles Vous pouvez lire les types de disques suivants sur ce lecteur. • Super Audio CD • CD audio • DSD Disc Ce lecteur ne peut pas lire les disques suivants. • CD-ROM (MP3, JPEG, etc.) • DVD • DTS-CD •...
  • Page 37: A Propos Du Super Audio Cd

    A propos du Super Audio Le Super Audio CD est un nouveau format de disque audio de qualité exceptionnelle assurant l’enregistrement de la musique avec la technologie DSD (Direct Stream Digital). (Les CD conventionnels sont, quant à eux, enregistrés au format PCM.) Avec une fréquence d’échantillonnage 64 fois supérieure à...
  • Page 38: Mise En Service

    Mise en service Nomenclature Pour plus de détails, reportez-vous aux numéros de page indiqués entre parenthèses. Les instructions de ce manuel décrivent les commandes du lecteur. Vous pouvez également utiliser les touches de la télécommande si elles portent des noms identiques ou similaires aux commandes du lecteur.
  • Page 39 Panneau arrière A Fiche IR REMOTE IN Seuls les modèles pour les États-Unis et le Canada en sont équipés. Permet de raccorder un répéteur infrarouge. B Fiches ANALOG OUT BALANCED L/R (12) Permet de raccorder un appareil avec des fiches d’entrée XLR, comme un amplificateur stéréo, etc.
  • Page 40 Télécommande A Interrupteur ?/1 (alimentation) (17) Met le lecteur sous tension ou hors tension. Pour permettre au lecteur de passer au mode d’économie (mode d’attente), appuyez sur \/1 (alimentation) sur la télécommande ou le lecteur. B Touche SA-CD/CD (22) Bascule entre la couche Super Audio CD et la couche CD d’un disque hybride.
  • Page 41: Connexion Des Composants Audio Analogiques

    Conseil En utilisation normale, les piles offrent une autonomie d’environ 6 mois. Lorsque la télécommande ne parvient plus à piloter le lecteur, insérez deux piles neuves. Remarques • Ne laissez pas la télécommande dans un espace extrêmement chaud ou humide. •...
  • Page 42: Connexion Des Composants Audio Numériques

    Connexion d’un composant avec des fiches d’entrée BALANCED Utilisez des câbles XLR (symétriques) (non fournis). Câble XLR (symétrique) (non fourni) 2: HOT (+) 3: COLD (-) 1: GROUND Vers les fiches d’entrée XLR (L/R) d’un amplificateur stéréo, etc. Remarque Le câble XLR (symétrique) est verrouillé : il ne peut donc pas être débranché, même lorsqu’on tire dessus.
  • Page 43 Remarques • Nous vous recommandons d’utiliser un câble HDMI de catégorie 2 pour raccorder le lecteur. • La fiche HDMI OUT du lecteur produit seulement le signal bleu comme vidéo. Elle ne produit pas d’autre signal vidéo. • Selon la performance HDMI du composant raccordé (le format, la fréquence d’échantillonnage, la résolution, la recevabilité...
  • Page 44: Réglage Du Signal De Sortie

    Réglage du signal de sortie Réglage du signal de sortie HDMI Vous pouvez définir si les signaux audio proviennent d’une fiche HDMI OUT ou non. HDMI Appuyez sur HDMI. Chaque fois que vous appuyez sur HDMI, le mode HDMI est activé ou désactivé. Mode HDMI OFF: La fiche HDMI OUT ne produit pas de signal audio.
  • Page 45 Sortie des signaux La sortie de signaux de chaque fiche de sortie varie selon le réglage de la touche HDMI et de l’interrupteur DIGITAL OUT (CD) situé sur le panneau arrière. Audio 2 canaux des Super Audio CD et CD : Produit des signaux audio.
  • Page 46: Réglage De La Zone Du Super Audio Cd À Laquelle Donner Priorité Pour La Lecture

    Réglage de la zone du Super Audio CD à laquelle donner priorité pour la lecture Lorsqu’une zone multicanaux et une zone 2 canaux sont toutes deux enregistrées sur une couche de Super Audio CD, et que le son est produit via HDMI, vous pouvez régler la zone de lecture qui sera automatiquement sélectionnée pour la lecture.
  • Page 47: Lecture Des Disques

    Lecture des disques Lecture d’un disque Les opérations de base sont expliquées ci- dessous. HDMI A N X ./> Mettez l’amplificateur sous tension. Baissez le volume au minimum. Préparez la mise en route du lecteur à l’aide du sélecteur de source de l’amplificateur.
  • Page 48: Utilisation De La Fenêtre D'affichage

    Utilisation de la fenêtre d’affichage La fenêtre d’affichage communique des informations sur le disque ou sur la plage en cours de lecture. Cette section décrit ces informations ainsi que les éléments affichés au cours des différents états du lecteur. Affichage TIME/TEXT TIME/TEXT DISPLAY...
  • Page 49 Pendant la lecture d’un disque Appuyez plusieurs fois sur TIME/TEXT. Temps de lecture de la plage en cours Temps restant de la plage en cours Temps écoulé du disque Temps restant du disque Titre de la plage* * Lorsqu’il n’y a pas de titre de plage «...
  • Page 50: Localisation Directe D'une Plage

    Localisation directe d’une plage — Sélection directe d’une plage Vous pouvez sélectionner une plage avant de débuter la lecture. Appuyez sur les touches numériques pour entrer le numéro de la plage, puis appuyez sur ENTER. Par exemple, • pour sélectionner la 8ème plage : 8 t ENTER •...
  • Page 51: Lecture Répétée Des Plages

    Lecture répétée des plages — Lecture répétée Vous pouvez répéter la lecture de la totalité du disque ou d’une plage déterminée. Cette fonction peut être utilisée avec la Lecture aléatoire pour lire toutes les plages dans un ordre aléatoire (page 21). CLEAR Appuyez à...
  • Page 52: Sélection De La Couche De Lecture

    Sélection de la couche de lecture Si vous lisez un disque hybride comportant une couche Super Audio CD et une couche CD (page 7), le lecteur lit automatiquement la couche Super Audio CD. Vous pouvez sélectionner la couche CD. SA-CD/CD SA-CD/CD Appuyez sur SA-CD/CD dans le mode arrêt.
  • Page 53: Lecture D'un Dsd Disc

    Lecture d’un DSD Disc Ce lecteur peut lire des disques que vous avez enregistrés au format de fichier DSF en utilisant un ordinateur, etc. Conditions pour les fichiers DSF lisibles Les fichiers DSF doivent répondre aux conditions suivantes pour être lus correctement sur ce lecteur.
  • Page 54: Informations Complémentaires

    Affichage Lorsque vous appuyez sur TIME/TEXT pendant la lecture, l’affichage indique : Numéro de l’album/numéro de la plage/temps écoulé de la plage Nom du fichier Le nombre total d’albums s’affiche dans le mode arrêt. Informations complémentaires Précautions Sécurité • Attention – L’utilisation d’instruments optiques avec cet appareil présente un risque oculaire.
  • Page 55: Remarques Sur Les Disques

    Super Audio CD. Si vous avez des questions ou des problèmes concernant votre lecteur, consultez votre revendeur Sony le plus proche. Remarques sur les disques Manipulation des disques •...
  • Page 56: Dépannage

    à résoudre les problèmes. Si un problème quelconque persiste, consultez votre revendeur Sony le plus proche. Impossible de lire le disque. • Il n’y a pas de disque dans le lecteur.
  • Page 57: Spécifications

    Aucune vidéo ne sort de la fiche HDMI OUT. • La fiche HDMI OUT du lecteur produit uniquement un signal bleu dans le système NTSC. Elle ne produit pas d’autre signal vidéo. il n’y a aucun son, et « Unmatched Sink » s’affiche.
  • Page 58 Généralités Propriétés des diodes laser Alimentation électrique Consommation électrique 25 W Consommation électrique (en veille) Dimensions (l/h/p) Poids (approx.) Accessoires fournis Cordon de connexion audio Télécommande Cordon d’alimentation secteur Piles La conception et les spécifications sont susceptibles d’être modifiées sans préavis. Durée d’émission : continue Sortie du laser* :...
  • Page 59: Index

    Informations complémentaires Index Accessoires fournis 28 Affichage des informations 18 AMS (Automatic Music Sensor) 17 ANALOG OUT 11 Câble de connexion Câble HDMI 12 Câble numérique coaxial 13 Câble numérique optique 13 Câble XLR (symétrique) 12 Cordon de connexion audio 11 Connexion Composants audio analogiques 11 Composants audio numériques 12...
  • Page 60 Printed in Malaysia...

This manual is also suitable for:

Scd-xa5400es

Table of Contents