Sony XES Operating Instructions Manual page 15

Note
If you have a 3-way
speaker system,
selecting "F/R/SUB-
W" may cause damage
to your tweeter.
Useful tips
To change any of the
initial settings at this
time, press the cursor
buttons to select the
item you want to
change.
3
Press ENTER.
The Cross-over Network (output mode) indication
appears.
Press ? or / to select "3way" or "F (front)/R (rear)/
SUB-W (sub-woofer)" depending on your speaker
system.
Cross-over Network
3way
4
Press ENTER.
The Initial indication appears.
Initial" Contrast
Exit ACC Position
Cross-over Network
5
To complete the initial settings, press . to
select "Exit," then press ENTER.
F/R/SUB-W
8
yes
3way
Getting Started
13