Sony PDW-R1 Operation Manual page 98

Item number Item name
131 AUDIO VOLUME
142
REPEAT MODE
143 INDEX PICTURE POSITION
145 MODE KEY ENABLE DURING
RECORDING
146 POWER SAVE MODE
Item number Item name
214 REMOTE INTERFACE
215 i.LINK MODE
216 PARALLEL RECORDING MODE
257 NETWORK ENABLE
98
7-3 Extended Menu
Menu items in the 100s, relating to the control panels
Settings
Select whether each of the ALL/CH-1, CH-2 to CH-4 adjustment knobs
on the control panel is effective to control the audio recording level and
playback level on each channel or the ALL/CH-1 adjustment knob alone
functions as a master control to control the audio level on all channels
together.
each: Each of the ALL/CH-1, CH-2 to CH-4 adjustment knobs is effective
to control each channel.
all: The ALL/CH-1 adjustment knob alone functions as a master control.
When "all" is selected, the ALL indicator to the right of the ALL/CH-1
adjustment knob lights up.
Put the unit into repeat playback mode, or exit from repeat playback
mode.
off: Exits from repeat playback mode.
play: Puts the unit into repeat playback mode.
Select the frame of the clip to use as the thumbnail image (index picture)
when recording.
0sec to 10sec: Can be set in the range from 0 seconds (first frame of the
clip) to10 seconds, in units of 1 second.
Specify whether only the STOP button stops recording.
ena (all enable): Recording stops when the EJECT button is pressed
and when the PLAY, STOP, SHUTTLE, and JOG buttons are
pressed.
stop: Recording stops only when the STOP button is pressed.
a) The disc is ejected after recording stops.
b) The unit enters stop mode when the PLAY button is pressed, and enters still
image mode (jog/shuttle mode) when the SHUTTLE or JOG button is pressed.
Specifies whether to put the unit into power save mode.
off: Do not put the unit into power save mode.
on: Put the unit into power save mode. The following operations take
slightly longer to start in power save mode.
• Recording, playback, jog and shuttle mode playback, search
• Display of the thumbnail screen and essence marks
Menu items in the 200s, relating to the remote control interface
Settings
When the remote control switch is set to REMOTE, select the device from
which to remote-control this unit.
9PIN: Device connected to the REMOTE connector.
i.LNK (i.LINK): Device connected to the S400 (i.LINK) connector.
Select the connection method for the S400 (i.LINK) connector.
AV/C: Connect with AV/C.
FAM (FAM (PC REMOTE)): Connect with FAM.
Specifies whether recording of video and audio on this unit should start
and stop at the same time as recording on a camcorder connected to this
unit by i.LINK(AV/C).
off: Do not conduct parallel recording.
on: Conduct parallel recording.
Select the remote control switch positions which enable network
connections.
net (network): Only when the switch is set to "NETWORK."
n&9P (network & remote(9PIN)): When the switch is set to
"NETWORK," and when the switch is set to "REMOTE" and extended
menu item 214 is set to "9PIN."
a) FTP connections can be made only when the device connected to the REMOTE
connector (D-sub 9 pin) is in stop mode. During FTP connections, the device
connected to the REMOTE connector cannot be used to control this unit.
b)
a)
a)