Thumbnail Search - Sony PDW-R1 Operation Manual

setting), just turning the jog dial with the JOG button off
starts playback in jog mode.
Playback in shuttle mode
In shuttle mode, you can control the speed of playback by
the angular position of the shuttle dial. The range of
playback speed is ±20 times normal speed.
To carry out playback in shuttle mode, proceed as follows.
TC
KEY INHI
ON
INT PRESET F-RUN
NETWORK
LOCAL EXT
ACCESS REMOTE RP188 REGEN R-RUN
OFF
ALL/CH-1 CH-2 CH-3 CH-4
VARIABLE
REC
PRESET
PB
AUDIO
PREV PLAY NEXT STOP
F REV F FWD
TOP END
3
1
Press the SHUTTLE button, turning it on.
2
Turn the shuttle dial to the desired angle
corresponding to the desired playback speed.
Playback in shuttle mode starts.
3
To stop playback in shuttle mode, return the shuttle
dial to the center position, or press the STOP button.
When extended menu item 101 "SELECTION FOR
SEARCH DIAL ENABLE" is set to "dial" (factory default
setting), just turning the shuttle dial with the SHUTTLE
button off starts playback in shuttle mode.
To alternate between normal-speed playback and
shuttle mode playback
Set the shuttle dial to the position corresponding to the
desired shuttle playback speed, then switch between
normal-speed playback and shuttle playback by pressing
the PLAY and SHUTTLE buttons alternately.
For intermittent shuttle mode playback, press the STOP
and SHUTTLE buttons alternately.

4-2-3 Thumbnail Search

Cuing up a desired clip
To display the thumbnail images of all clips on the disc,
and cue up a desired clip, proceed as follows.
52
4-2 Playback
1
SHUTTLE JOG
SUB THUMB
COUNTER
CLIP NAIL SHIFT
SEL HOLD
CLIP
ESSENCE
MENU MARK
METER MONITOR
MENU SET RESET
SEL SEL
L/ST/R
SYSTEM S.SEL
MENU
MARK1
REC
IN OUT
MARK2
2,3
COUNTER SEL button
SUBCLIP button
COUNTER
KEY INHI TC
ON
INT PRESET F-RUN SEL HOLD
NETWORK
LOCAL EXT
ACCESS REMOTE
OFF RP188 REGEN R-RUN
ALL/CH-1 CH-2 CH-3 CH-4
METER MONITOR
VARIABLE
SEL SEL
REC
PRESET
PB
L/ST/R
AUDIO
PREV PLAY NEXT STOP REC
F REV F FWD
TOP END
3
1
With the SUBCLIP button off, press the
THUMBNAIL button, turning it on.
The thumbnails of clips on the disc appear.
Name of currently
a)
selected clip
Thumbnail of currently selected clip
(first frame or specified
Recording date and
time of selected clip
a) When a title has been assigned to a clip (see page 75), the title
is enclosed in double quotation marks, for example
"TITLE00001."
b) The thumbnail frame can be specified by a menu selection
when the clip is recorded (see page 98).
To switch between duration and time code display
in the thumbnail display
Press the COUNTER SEL button. Each press of the
button toggles between duration display and time code
display.
To escape from the thumbnail display to the full-
screen display
1 3
SHUTTLE JOG
SUB THUMB
CLIP NAIL SHIFT
CLIP
ESSENCE
MENU MARK
MENU SET RESET
SYSTEM S.SEL
MENU
MARK1
IN OUT
MARK2
2
Sixth clip is
selected from a
total of 143 clips.
b)
frame)
Duration of selected clip or
time code of first frame