Sony PDW-R1 Operation Manual page 128

Message in time Display
data display
condition
Run Salvage on, limit
MAX # Files on, limit, off
Disc Full! on, limit, off
MAX# SB CLP on, limit, off
CL OVER DUR on, limit, off
Disc Damage on, limit, off
Non AV Full on, limit, off
No Clip! on, limit
Disc Top! on
Disc End! on
TC EXT! on
REGEN mode! on
128
8-4 Alarms
Description
a)
A recording or E-E display command
was received for a disc that needs clip
recovery (salvage).
The number of files on the disc had
reached the upper limit (5000), or there
was not enough capacity in the General
directory when a command was
received to record, display an E-E
picture, record an essence mark, or add
a quick scene selection sub clip.
A command was received to record or
display an E-E picture when there was
not enough free capacity on the disc, or
when the number of recorded clips had
reached the upper limit (300).
A command was received to add a sub
clip when the number of registered sub
clips had already reached the upper limit
(300) of the specifications of this unit.
A command was received to add a sub
clip when the total duration of sub clips
in the clip list had already reached the
upper limit (24 hours) of the
specifications of this unit.
A command was received to record,
display an E-E picture, record an
essence mark, or add a quick scene
selection sub clip when there was no
free sparing area.
A command was received to record,
display an E-E picture, record an
essence mark, or add a quick scene
selection sub clip when there was no
free Non-Real-Time space.
A playback or search command was
received for a disc containing no
recorded clips.
A PREV or reverse high-speed search
command was received with the disc
stopped at the top.
A NEXT or forward high-speed search
command was received with the disc
stopped at the end.
A time code or user bits preset
command was received with the INT/
EXT/RP188 switch is set to EXT and the
PRESET/REGEN switch is set to
PRESET.
A time code or user bits preset
command was received with the
PRESET/REGEN switch is set to
REGEN.
Action
Try the operation again after recovering
clips from the disc (salvage function).
See 3-6-7 "Handling of Discs When
Recording Does Not End Normally
(Salvage Function)" (page 40).
Exchange the disc for one with enough
free capacity.
These operations are not possible.
This disc cannot be recorded. Exchange
the disc.
Insert a different disc with enough free
capacity.
These operations are not possible.
Try the operation again after setting the
INT/EXT/RP188 switch to INT and the
PRESET/REGEN switch to PRESET.
See 7-3-2 "Extended Menu Operations"
(page 108) about how to make this setting.