Sony PDW-R1 Operation Manual page 96

3
Hold down the SHUTTLE button, and turn the jog dial
or shuttle dial to set menu item 013 to "on."
4
Press the SET button.
5
Hold down the SHUTTLE button, and turn the jog dial
or shuttle dial to select the line mode 525(U), 525(J) or
625.
6
Press the SET button.
7
Turn the unit off (press the on/standby switch to put
the unit in the standby state).
Next time the unit is turned on (when the unit is put in the
operating state by pressing the on/standby switch), it
operates in the new mode.
Menu bank operations (menu items B01 to
B13)
This unit allows menu settings to be saved in what are
termed "menu banks." Saved sets of menu settings can be
recalled for use as required.
To jump to menu item B01
You can recall any required menu by turning the jog dial
or shuttle dial after pressing the MENU button.
If you press the MENU button first, then the COUNTER
SEL button, you can jump directly to menu item B01 or
H01. The recalled menu item toggles between B01 and
H01 every time you press the COUNTER SEL button.
Saving the current active menu settings
Set one of basic menu items B11 "SAVE SETUP BANK-
1" to B13 "SAVE SETUP BANK-3" to "on," depending
on which of the menu banks you wish to save in, then press
the SET button.
Recalling settings from a menu bank
Set one of basic menu items B01 "RECALL SETUP
BANK-1" to B03 "RECALL SETUP BANK-3" to "on,"
depending on which of the menu banks you wish to recall
from, then press the SET button.
To recall menu bank 4, select "bank-4" under menu item
B20 "RESET SETUP MENU."
Refer to the maintenance manual for more information
about menu bank 4.
96
7-2 Basic Setup Menu
Recall
Current active
menu settings
Save
Recall
Save
Recall
Save
Recall
Save
Note
The following message appears if the line mode of the
menu bank that you are about to recall differs from the
current line mode.
Display in the video panel and on an external monitor
ITEM-B01
RECALL SETUP BANK-1
System will be changed.
Are you sure you want
to execute?
EXECUTE :
ABORT
Message in time data display
Press the SET button to recall the settings and switch to the
line mode saved in the menu bank. When you power the
unit off and then on again, it will use the line mode and
settings of the selected bank.
To cancel the recall, press the MENU button.
Menu bank 1
Menu bank 2
Menu bank 3
Menu bank 4
SET KEY
: MENU KEY