Aiwa NSX-MT960 Operating Instructions Manual page 18

Aiwa compact disc stereo system operating instructiont960s nsx-mt960
Hide thumbs Also See for NSX-MT960:
Table of Contents

Advertisement

Available languages

Available languages

1,4
2
3
Preparation
Set the
tape to the point where recording
will start.
The reverse
mode is automatically set to =. Note that recording
will be done on one
side of the tape only.
1
2
3
4
5
Press TAPE.
Insert the original
tape into deck 1 and the tape
to be recorded
on into deck 2.
Insert the tapes with the sides to be played back or recorded
on facing out from the unit.
Press DOLBY NR to turn off the Dolby NR.
00
NR on the
display goes out.
Press TAPE/DECK
1/2 to select deck 1.
"TPI" is displayed.
Press
REC/REC MUTE to start recording.
Playing and recording start simultaneously.
To stop dubbing
Press
.
To set the Dolby NR when playing
back the dubbed
tape
Press DOLBY NR and turn Dolby NR on or off to match the
original tape.
This function allows you to make exact copies of both sides of
the original tape. The
reverse
side of both tapes will start
simultaneously as soon as the longer tape has been reversed.
m
Dubbing does not start from a point halfway in the tape.
The reverse mode is automatically set to ;:).
The Dolby NR does not affect recording.
1
2
3
Press TAPE.
Insert the original
tape into deck 1 and the tape
to be recorded
on into deck 2.
Insert each tape with the side to be played back or recorded
on first facing out from the unit.
Press SYNCHRO DUBBING once or twice to start
recording.
0
For recording
at normal speed, press it once to display
NORM-DUB.
@ For recording
at high speed, press it twice to display
HIGH-DUB.
0
@
The tapes are rewound to the beginning of the front sides,
and recording starts.
To stop dubbing
Press W.
To set the Dolby NR when playing
back the dubbed tape
Press DOLBY NR and turn Dolby NR on or off to match the
original tape.
m'
Recording does not start, if the erasure prevention tab on either
side of the tape is broken off.
If the leader segment of the tape to be recorded on is longer
than that of the original tape, recording cm the reverse side
may stop midway through the recording. In this case, dub each
side manually following the procedure in "DUBBING A TAPE
MANUALLY".
'17
ENGLISH

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cx-nmt960Sx-na952Sx-c605Sx-r275

Table of Contents