Karaoke Program - Aiwa NSX-MT960 Operating Instructions Manual

Aiwa compact disc stereo system operating instructiont960s nsx-mt960
Hide thumbs Also See for NSX-MT960:
Table of Contents

Advertisement

Available languages

Available languages

m
While the disc compartment is opened with DISC CHANGE,
do not press buttons other than DISC CHANGE or A OPEN/
CLOSE. Doing so may cause malfunctions. In this case, reset
the unit referring "To reset" on page 28.
When loading an 8-cm (3-inch) disc, make sure to put it onto
the inner circle of the tray precisely. Otherwise, the disc may
be damaged or the disc compartment will not open. If it does
not open, please consult your Aiwa dealer for repair.
c Do not use irregular shape CDs (example: heart-shaped,
octagonal ones). It may result in malfunctions.
Do not place more than one compact disc on one disc tray.
Do not tilt the unit with discs loaded. Doing so may cause
malfunctions.
When transporting the unit, remove the discs from the trays.
When replacing the discs during play, do not replace discs other
than those facing you.
If you place a disc on the empty right inner tray, and then press
4
OPEN/CLOSE,
"ERROR"
is displayed
and the disc
compartment may not close. Remove the disc on that tray.
Never place here.
Use the remote control.
RANDOM play
All the tracks on the selected disc or on all the discs can be
played randomly.
REPEAT play
A single disc or all the discs can be played repeatedly.
Press RANDOM/REPEAT.
Each time it is pressed, the function can be selected cyclically.
RANDOM play — RANDOM lights up on the display.
REPEAT play — ~
lights upon the display.
RANDOM/REPEAT
play — RANDOM and % light up on
the display
Cancel — RANDOM and CL disappear from the display.
To play all discs, press 4>
to start play.
To play a single disc, press DISC DIRECT PLAY, then press
one of the numbered buttons
1-5
within 3 seconds to start play.
During random play it is not possible to skip to the previously
played track with the 44.
Up to 30 tracks can be programmed from any of the inserted
disc.
1
2
2,3
Use the remote control.
1
2
3
Press PRGM twice
5
in stop mode.
PRGM indicator lights upon the display.
PRGM
When PRGM is pressed once in step 1, the unit enters
KARAOKE PROGRAM (page 23).
Press DISC DIRECT PLAY, then press one of the
numbered
buttons
1-5 within 3 seconds
to select
a disc.
Go
to the next step when the tray stops rotating.
Press numbered
buttons
O-9 and +1 Oto program
a track.
Example:
To select the 25th track, press +10, +1O
and
5.
To select the 10th track, press +1O and O.
Total number of
Selected track number
selected tracks
4
5
Program number
Total playing time of
the selected tracks
Repeat steps 2 and 3 to program
other tracks.
Press 4>
to start play.
To check the program
Each time <
or >
is pressed in stop mode, a disc number,
track number, and program number will be displayed.
To clear the program
Press
CLEAR in stop mode.
To add tracks to the program
Repeat steps 2 and 3 in stop mode. The track will be programmed
after the last track.
To change the programmed
tracks
Clear the program and repeat all the steps again.
To play the programmed
tracks
repeatedly
After programming
the tracks,
press RANDONVREPEAT
repeatedly until % appears on the display.
m
During programmed
play, you cannot perform random play,
checking the remaining time, and selecting a disc or track.
ENGLISH
12

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cx-nmt960Sx-na952Sx-c605Sx-r275

Table of Contents