Power Cable; Hanger Rod And Support; Installation Of Indoor Unit; Outline And Installation Dimension - Gree FGR25Pd/DNa-X Service Manual

Total length of
communication
line between
Material type
indoor unit and
wired controller
L (m/feet)
Light/Ordinary
polyvinyl
chloride
L≤250m
sheathed
(L≤820-1/5feet)
cord. (60227
IEC 52
/60227 IEC 53)

2.5 Power cable

Only copper conductors can be used as power cables. The copper conductors must meet relevant
national standard and satisfy the carrying capacity of unit.

2.6 Hanger rod and support

a. Hanger rod: M8 or M10;
b. U-steel: 14# or above;
c. Angle steel: 30mm×30mm×3mm or above;
d. Round steel: Φ10mm or above

3 Installation of Indoor Unit

3.1 Outline and installation dimension

Duct type split Air conditioner Inverter Series
2
Wire size (mm /AWG)
2×0.75~2×1.25
(2×AWG18~2×AWG16)
67
Material
Standard
1.Total length of communication
line can't exceed 250m
(820-1/5feet).
2.The cord shall be Circular cord
IEC (the cores shall be twisted
together).
60227-5:2007
3.If unit is installed in places with
intense magnetic field or strong
interference, it is necessary to
use shielded wire.
Remarks