Gree FGR25Pd/DNa-X Service Manual page 48

 Click "Start" to enable the debugging function. Then debugging will be started up automatically.
indicates that debugging is in progress while
If "OK" button is displayed, it means user needs to judge whether to continue debugging or not.

Click icon and relevant information will be shown for your reference. Click "Close" to close the
pop-up (For No.3 Confirm ODU Basic Module NO. and No.4 Confirm IDU NO., the current number
of units under debugging will be displayed. See the following marked with circle. For No.8 Compr.
Preheat Confirmation, the preheat time will be displayed. See the following marked with circle).
Duct type split Air conditioner Inverter Series
46
indicates debugging is completed.