Unlock The Ignition Switch In An Emergency - Honda CLICK125 Owner's Manual

Unlock the Ignition Switch in an Emergency

CA type
#
Set up to ID number input mode
Check the ID number on the ID tag.
1.
Press and hold the ignition switch for
2.
more than 4 seconds.
The Honda SMART Key indicator
u
flashes.
Press the ignition switch while the Honda
3.
SMART Key indicator is flashing.
The Honda SMART Key indicator stay
u
lit, and the ID number input mode
turns on.
112
ID number
#
ID number input
You can input your ID number by pressing the
ignition switch when the ignition switch is
(Off), (Lock) or SEAT position. Input the
ID number on the ID tag in order from the left
in turn by pressing the ignition switch.
The ID number is authenticated according to
the number of times the ignition switch is
pushed.
Push the ignition switch the desired number
of times within 5 seconds when the Honda
SMART Key indicator comes on. After 5
seconds, the Honda SMART Key indicator
goes off and comes on again. This means
that the inputted number is fixed, and you
can input the next number.
If the Honda SMART Key indicator does not
u
come on, the battery may be low.
Contact your dealer.