Capacitor Module Connections - Allen-Bradley Kinetix 5700 User Manual

Capacitor Module
Connections
Follow these guidelines when wiring the 2198-CAPMOD-2240 capacitor
module and 2198-CAPMOD-DCBUS-IO extension module:
• Wire module status (MS) relay output connections to digital input Bus
Capacitor OK or the Logix5000™ controller (optional).
• Refer to
• Refer to
for troubleshooting the module status indicators and relay output.
• Refer to the installation instructions provided with your Kinetix 5700
capacitor module, publication 2198-IN008.
IMPORTANT To improve system performance, run wires and cables in the wireways as
Figure 87 - Capacitor Module Features and Indicators
4
MOD
DC BUS
3
5700
2
MODULE
STATUS
2198-CAPMOD-2240
Capacitor Module
(front view)
1
Item Description
1 Ground stud
2 Module status (MS) connector
3 DC-bus status indicator
4 Module status indicator
5 Stud/lug cover with wires
6 Stud cover without wires
(1) This example shows the lug cover oriented for wires exiting to the left (capacitor module is on the far left of the drive
configuration). Rotate lug cover 180° when wires exit to the right (capacitor module is on the far right of the drive
configuration).
Rockwell Automation Publication 2198-UM002E-EN-P - February 2018
Kinetix 5700 Capacitor Module
Kinetix 5700 Capacitor Module Status Indicators
established in Chapter 2. Connections to the DC bus must be made with the
shared-bus connection system.
11
12
2198-CAPMOD-2240
Capacitor Module
(side view, lug cover removed)
6
7
8
24V–
24V+
2198-CAPMOD-2240 Capacitor Module
Item
7
8
9
10
(1)
11
12
Connect the Kinetix 5700 Drive System
wiring example on page
on
24V–
24V+
(top views)
Description
DC-bus (DC) connector
24V control input power (CP) connector
DC– M8 stud (external DC-bus)
DC+ M8 stud (external DC-bus), shown with wire lug
M8 hex nut
Lug spacer
Chapter 5
283.
page 224
5
10
9
131