Ethernet Connections; 24V Dc Back-Up Power - Allen-Bradley Kinetix 300 User Manual

Chapter 3 Kinetix 300 Drive Connector Data and Feature Descriptions
50

Ethernet Connections

An RJ45 Ethernet connector (port 1) is provided on the Kinetix 300 drive.
Table 15 - Ethernet Communication Specifications
Attribute
Communications
Cyclic update period
Auto MDI/MDIX crossover
detection/correction
Cabling

24V DC Back-up Power

The Kinetix 300 drive can use an external power supply to power the logic and
communication circuits. If an independent 24V (@ 1 A) power supply is
connected to the BP connector, the logic and communication circuits remain
active during a mains input power loss.
Table 16 - 24V DC Back-up Power Specifications
Attribute Value
Input voltage 20...26V DC
Current 500 mA
Inrush, max 30 A
Rockwell Automation Publication 2097-UM001D-EN-P - November 2012
Value
100BASE-TX, full duplex
2 ms, min
Yes
CAT5E or CAT6, unshielded or shielded, 100 m (328 ft)