Configure The Kinetix 5700 Drive Modules; Configure The Dc-Bus Power Supply - Allen-Bradley Kinetix 5700 User Manual

Configure the Kinetix 5700
Drive Modules
further limit your search.
IMPORTANT To configure Kinetix 5700 drive systems, you must be using the
IMPORTANT The iTRAK power supply is not configured in the Logix Designer application.

Configure the DC-bus Power Supply

Follow these steps to configure the DC-bus power supply.
1. Below the controller you just created, right-click Ethernet and choose
New Module.
The Select Module Type dialog box appears.
Enter 2198 here to
2. By using the filters, check Motion and Allen-Bradley, and select your
2198-Pxxx DC-bus power supply as appropriate for your hardware
configuration.
3. Click Create.
Rockwell Automation Publication 2198-UM002E-EN-P - February 2018
Configure and Start the Kinetix 5700 Drive System
Logix Designer application, version 26.00 or later.
For more information, see the iTRAK System User Manual, publication
2198T-UM001.
Chapter 6
151