Edit One-To-One Nat (Network Address Translation) - Billion BIPAC 8501 User Manual

Edit One-to-One NAT (Network Address Translation)

One-to-One NAT maps a specific private/local IP address to a global/public IP address.
If you have multiple public/WAN IP addresses from you ISP, you are eligible for One-to-One NAT to utilize
these IP addresses.
NAT Type: Select desired NAT type. As set in default setting, it disables the One-to-One NAT function.
Global IP Address:
Subnet: The subnet of the public/WAN IP address given by your ISP. If your ISP has provided
this information, you may insert it here. Otherwise, use IP Range method.
IP Range:
192.168.1.1, end IP: 192.168.1.10
Select the Apply button to apply your changes.
Check
Chapter 4: Configuration
The IP address range of your public/WAN IP addresses. For example, IP:
to create a new One-to-One NAT rule:
SHDSL VPN Firewall Bridge/Router
115