NEC DLP Cinema NC3541L Installation Manual page 101

Appendix
Error
Code
1709 SensorFail LD1-EX3
1710 SensorFail LD1-EX4
1711 SensorFail LD2-R1
1712 SensorFail LD2-R2
1713 SensorFail LD2-R3
1714 SensorFail LD2-R4
1715 SensorFail LD2-B
1716 SensorFail LD2-EX1
1717 SensorFail LD2-EX2
1718 SensorFail LD2-EX3
1719 SensorFail LD2-EX4
1720 SensorFail HS-PW1
1721 SensorFail HS-LD1
1722 SensorFail HS-PW2
1723 SensorFail HS-LD2
1724 SensorFail LD1-PHOTOSENS
1727 SensorFail LD2-PHOTOSENS
1730 SensorFail DMD-INTAKE
1731 SensorFail DMD-INNER
1732 SensorFail CIRCULATE
1733 SensorFail INTAKE
1734 SensorFail ELECTRO-BOX
2000 IntegrityFail
2002 LD B Stop
2003 LD VIN Error
2004 LD R Stop
2005 LD G Stop
2010 Incorrect power-off
2013 LU1 Unlit
2014 LU2 Unlit
2200 SetCtrl FPGA DONE Fail
2201 VCCINT PGOOD Fail
2202 SetCtrl FPGA Comm Fail
2203 I2C(SET_TH-A/D) ACK Fail
2204 I2C(SET_TH-A/D) Tout
2205 I2C(PressSens) ACK Fail
2206 I2C(PressSens) Tout
2209 SSL FPGA Comm2 Fail
2210 Slave Data Fail(Fan)
2211 Slave Data Fail(Pump)
2212 Slave Data Fail(LD)
2213 SET_Pump Fail
2214 I2C(SET_Pump) ACK Fail
2215 I2C(SET_Pump) Tout
2216 I2C(Exp-1) ACK Fail
2217 I2C(Exp-1) Tout
2218 I2C(Exp-2) ACK Fail
2219 I2C(Exp-2) Tout
2220 I2C(Exp-3) ACK Fail
2221 I2C(Exp-3) Tout
2222 I2C(EEPROM-KEY) ACK Fail
126
Error message
Failed to read LD1-EX3 sensor.
Failed to read LD1-EX4 sensor.
Failed to read LD2-R1 sensor.
Failed to read LD2-R2 sensor.
Failed to read LD2-R3 sensor.
Failed to read LD2-R4 sensor.
Failed to read LD2-B sensor.
Failed to read LD2-EX1 sensor.
Failed to read LD2-EX2 sensor.
Failed to read LD2-EX3 sensor.
Failed to read LD2-EX4 sensor.
Failed to read HS-PW1 sensor.
Failed to read HS-LD1 sensor.
Failed to read HS-PW2 sensor.
Failed to read HS-LD2 sensor.
Failed to read LD1-PHOTOSENS sensor.
Failed to read LD2-PHOTOSENS sensor.
Failed to read DMD-INTAKE sensor.
Failed to read DMD-INNER sensor.
Failed to read CIRCULATE sensor.
Failed to read INTAKE sensor.
Failed to read ELECTRO-BOX sensor.
Integrity error with the internal software code of the projector.
* When this error has occurred, the projector will not accept any external
demands. Communication with external devices will not be performed
either.
An error with channels of the LD drivers.
An error with the VIN of any one of the LD Drivers.
An error with channels of the LD drivers.
An error with channels of the LD drivers.
PowerOff was not performed correctly last time.
LU1 is not on.
LU2 is not on.
SetCtrl FPGA Configuration Error.
Error detected with VCCINT (1.0V) power supply for FMT FPGA.
Communication error with SetCtrl FPGA.
I2C Device Access Error.
I2C Device Access Error.
I2C Device Access Error.
I2C Device Access Error.
Communication error with SSL FPGA.
Slave CPU data error.
Slave CPU data error.
Slave CPU data error.
Pump(DMD Fan) Access Error.
I2C Device Access Error.
I2C Device Access Error.
I2C Device Access Error.
I2C Device Access Error.
I2C Device Access Error.
I2C Device Access Error.
I2C Device Access Error.
I2C Device Access Error.
I2C Device Access Error.
Description