Table of Contents
Advertisement
1
Remove two mounting metals of the lens holder.
Remove four mounting screws and remove two mounting metals.
These four mounting screws and two mounting metals will be used for lens
holder mounting.
2
Place the lens with the face upward.
Check that the place for putting the lens is flat before the work.
It is recommended to keep the lens cap set so as to protect the lens from any damage.
3
Insert the lens holder from under the lens.
Align the lens holder slits with two lens insertion guides and insert the lens holder.
4
Fix two mounting metals of the lens holder with four mounting screws.
5
Attach the gearbox cover.
Attach the attached gearbox cover with two screws.
6
Remove the lens cap.
If the lens has a lens cap, remove the lens cap.
Lens holder
Slit
Lens insertion guides
Setting Up Your Projector
Mounting screws
Mounting
metals
Lens holder
mounting metal
Lens holder
Lens
79
Advertisement
Table of Contents
