2. Setting Up Your Projector
2-1. Setup Procedure
Set up the projector according to the procedure below. This chapter describes the installation of procedure until turning on of
the power.
• Step 1
Projector Installation (See page 39)
• Step 2
Selecting the Power Cable (See page 42)
Connecting the Power Cable (See page 48)
• Step 3
Mounting the Lens Unit (See page 78)
• Step 4
Mounting the following optional parts as required.
- Installing the Media Block (NP-90MS01/NP-90MS02) (See page 82)
38