Table of Contents
Advertisement
LCD Menu
Main menu
Configuration
(Memory)
(Title Setup)
Preset Button
Information
Light
AC Voltage
Preset Button
Usage
Error Code
Version
IP Address
Setup Date
Option Status
(Note) Requires logging into the projector with Advanced User or higher privileges.
TIP
If you are logged in to the projector with Installation privileges, you cannot use the following items.
• [Factory Default]-[LAN] (P.103)
• [Reset]-[Fan Usage] (P.104)
• [Reset]-[Light Usage] (P.104)
• [Reset]-[Phosphor] (P.104)
• [Reset]-[Diffuser] (P.104)
• [Configuration]-[Installation]-[Service] (P.111)
98
Submenu
The content of the selected light memory (light output power
Light
value) can be overwritten with the current settings.
Lens
The content of the selected lens memory can be overwritten with
the current settings.
Preset Button 1–20
Sets the title to be assigned to the preset buttons (<1> to <10>
buttons).
Output
Displays the light source output setting.
Displays the power supply voltage value supplied to the
projector.
Preset Button 1–20
Displays the titles which are assigned to the preset buttons (<1>
to <10> buttons).
Displays information related to projector usage.
Displays the currently occurring error.
System
Displays the model name and various version information about
the projector.
IMB
Displays the vendor name and version information about the
media block (IMB).
System
Displays the IP address of the projector.
Displays the date when the projector was set up (starting date of
the warranty period).
Displays the link status of the device mounted in slot and
projector.
Description
Reference
page
113
114
115
115
115
116
116
117
117
117
118
118
Advertisement
Table of Contents
