Version; Ip Address - NEC DLP Cinema NC3541L Installation Manual

Hide thumbs Also See for DLP Cinema NC3541L:
Table of Contents

Advertisement

4-5-6. Version

Displays the version information about the projector, optional boards and IMB.
System
Displays the version information of the projector.
Display items are as follows.
• Model
• Kernel
• RFS
• Data
• ICP ConfigFile
• Slave Firmware
• Set Ctrl FPGA
• SSL Firmware
• SSL FPGA
• LD Driver1
• LD Driver3
• Router
IMB
Displays the vendor name and version information about the media block (IMB). When the projector is in standby mode, the
vendor name is blank and the version information displays "---". Displays "Not Use" when IMB is not mounted to the
projector.
* When the NP-90MS01/NP-90MS02 is mounted, the vendor name displays "IMS".

4-5-7. IP Address

Displays the IP address set in the projector.
System
← Selects the item to display.
← Displays the version information.
• Serial No.
• U-Boot
• Main Software
• ICP
• Slave BIOS
• Slave Data
• SSL BIOS
• SSL Data
• Secure Processor
• LD Driver2
• LD Driver4
← Displays the vendor name.
← Displays the version information.
← Displays the IP address.
Displays the IP address set for the projector (System).
LCD Menu
117

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dlp cinema nc2041l

Table of Contents