Magtek iDynamo 5 Installation And Operation Manual page 17

2 - Installation
7) Install and configure the host software you intend to use with iDynamo. If you do not yet have host
software, you can download a test tool from the App Store called
, to perform simple tests.
MagTek, Inc.
8) Make sure the host software is configured to look for the device on the proper connection type.
9) Make sure the host software is configured to look for the correct device.
10) Make sure the host software is configured to properly interpret incoming data from the device.
11) Use the host software or the
details, see section 3.2 Card Reading. If you are using the
a) At the bottom of the app, select
b) Press the
Connect
Connected...
will say
iDynamo 5 and iDynamo 5 (Gen II)| Secure Card Reader Authenticator | Installation and Operation Manual
app to test swiping, inserting, and tapping a card. For
MagTek Test
Lightning
button. If the host successfully connects, the main reporting area of the app
.
Page 17 of 33 (D99875473-120)
MagTek Test
MagTek Test
.
, published by
app, follow these steps: