Krups Espresseria Automatic EA 80 Series Use And Maintenance page 28

KRUPS Espresseria Automatic
Once the cleaning cycle is finished, the
"clean" indicator light will flash again.
Empty the recipient and put it back under
the coffee tubes and steam nozzle.
Press the "Service" button.
The "clean" indicator light will remain lit
Once the first rinsing cycle is finished, the
"clean" indicator light will flash again.
Empty the recipient and put it back under
the coffee tubes and steam nozzle.
Press the "Service" button.
The "clean" indicator light will remain lit.
Once the second rinsing cycle is finished,
the "clean" indicator light will be extingui-
shed.
Remove the recipient and empty it.
Empty the drip tray and fill the water tank.
! Caution: If the cleaning programme
is interrupted by a power cut or acciden-
tal unplugging of the machine, it must be
started again from the beginning. A new
cleaning tablet will be required in this
26 Use and maintenance / SERIE EA 80xx
i
Info : The first rinsing cycle starts and
runs automatically. It allows the rest of the
cleaning product to be eliminated from inside
the appliance. This first cycle lasts around 5
minutes.
i
Info : The second rinsing cycle starts and
runs automatically. This second cycle lasts
around 5 minutes.
case. The programme must be started
again completely in order to rinse the
water circuit and eliminate any traces of
harmful cleaning products.