Safety Guidelines - Krups Espresseria Automatic EA 80 Series Use And Maintenance

KRUPS Espresseria Automatic

1.3 Safety guidelines

!
Danger : These safety guidelines are intended to protect you and other persons
and the appliance. They must therefore be respected.
Conditions of use
The appliance, the power cord and the
•
mains plug must not be brought into
contact with humidity or liquids. Any
contact of the conductive parts of the
appliance with humidity or water may
lead to fatal injuries due to the presence
of electricity! This appliance must only be
used indoors in dry areas.
In the case of a change in the ambient
•
temperature, from cold to hot, wait for a
few hours before using your machine so
that it is not damaged by condensation.
Electrical power supply
Danger : Failing to respect these
guidelines may lead to fatal injuries due
to electricity!
• Check that the supply voltage marked
on the rating plate of the appliance is the
same as that of your electrical supply.
Only connect the appliance to an earthed
mains socket.
Voltage: 220-240V~/50 Hz.
• Ensure that the mains socket is easily
accessible so that the appliance may be
unplugged easily in the event of any fai-
lure or a thunderstorm for example.
For the safety of the appliance, unplug it
from the socket during thunderstorms.
Do not pull the power cord but the plug
itself to unplug it.
• Unplug it from the mains socket imme-
diately if any operational failure occurs or
if there is a problem with the percolation.
Unplug the appliance when it is not to be
used for a long period.
• Do not use the appliance if the power
cord is damaged. Using a damaged
6 Use and maintenance / SERIE EA 80xx
Avoid leaving the appliance in direct
•
sunlight, exposed to heat, cold, frost or
humidity.
Do not place the appliance on a hot
•
surface such as a hob or close to a
naked flame, in order to avoid any risks of
fire!
power cord or having your appliance re-
paired incorrectly means that there is a
risk of electrical shock, fire or short-cir-
cuit. Furthermore, the guarantee on the
appliance will be invalidated in such
conditions. The power cord must be re-
placed by a Krups' Approved After-Sales
Service Centre.
• Do not let the power cord dangle over
the edge of a table or a work top. Do not
leave the power cord close to or in
contact with the hot parts of the ap-
pliance.
• We do not recommend the use of ex-
tensions or multi-adapter plugs.
• Any incorrect connection invalidates the
guarantee