Iso-K www.blaubergventilatoren.de CONTENT Introduction General Safety rules Transport and storage requirements Manufacturer's warranty Fan design Delivery set Technical data Mounting and operation guidelines Mounting sequence Connection to power mains Maintenance Troubleshooting Acceptance certificate Connection certificate Warranty card Iso-K_v.1(2)-EN.indd 2 10.08.2015 15:20:59...
Iso-K www.blaubergventilatoren.de BLAUBERG Ventilatoren GmbH Company is happy to offer your attention fire-protection devices. Sufficient air supply must be provided for proper the sound-insulated fan BLAUBERG Iso-K. combustion and exhaust of gases through the chimney of fuel burning equipment to prevent back drafting. The maximum permitted pressure difference per living units is 4 Pa.
Iso-K www.blaubergventilatoren.de FAN DESIGN Exhaust spigot Casing Centrifugal impeller Electric motor Terminal box Supporting mounting frame Vibration isolator Fig. 1. Iso-K fan design The steel is made of galvanized steel and is internally filled with 50 mm The motor is equipped with ball bearings for longer service life and a thermal- and sound-insulating layer made of non-flammable mineral wool.
Iso-K www.blaubergventilatoren.de MOUNTING AND OPERATION GUIDELINES WARNING Before starting mounting: Read carefully the fan mounting, start-up, operation and servicing instructions; Check the fan for possible transport damages. Follow the safety regulations during the fan start-up and operations. The fan is designed for connection to round air ducts on both sides of the Install the fan to ensure sufficient and quick access for servicing and repair fan.
Iso-K www.blaubergventilatoren.de CONNECTION TO POWER MAINS WARNING Read the operation manual prior to any electric installations. Connection of the fan to power mains is allowed by a qualified electrician only. The rated electrical parameters of the fan are stated on the rating plate. No modifications of internal connections are allowed and will result in void warranty.
Iso-K www.blaubergventilatoren.de MAINTENANCE ATTENTION Cut power supply to the fan off by turning the automatic electric switch QF to OFF position. Take steps to prevent activation of the automatic switch prior to finishing maintenance. Disconnect the fan from power mains prior to any operations related to ...
Company: Name: Date Signature WARRANTY CARD Iso-K SELLER SALES DATE REPRESENTATIVE IN EU Blauberg Ventilatoren GmbH Aidenbachstr. 52a, D-81379 München, Deutschland Iso-K_v.1(2)-EN.indd 9 10.08.2015 15:21:03...
Need help?
Do you have a question about the Iso-K Series and is the answer not in the manual?
Questions and answers