ZIMO MX638 Series Instruction Manual page 74

Page 74 Non-Sound Decoder MX618 - MX638 and Sound Decoder MX640 - MX659
Chap-
CV Denomination Range
ter
full load sound
Duration of
0 – 255
5.6 #282
acceleration sound
Chuff sound
0 – 255
5.6
#283 volume during full
acceleration
Threshold for decel-
0 – 255
5.6
#284
eration sound
Duration of reduced
0 – 255
5.6
#285 volume during
deceleration
Volume level during
0 – 255
5.6 #286
deceleration
Brake squeal
0 – 255
5.4 #287
threshold
Minimum driving
0 – 255
5.4
#288 time w/o brake
squeal
Thyristor:
1 – 255
5.7
#289 Stepping effect
Thyristor sound,
0 – 100
5.7
#290 pitch at medium
speed
Thyristor sound,
0 – 100
5.7
#291 pitch at maximum
speed
Thyristor: speed
0 – 255
5.7
#292 step for medium
speed
Thyristor control,
0 – 255
5.7 #293 Volume at steady
speed
Thyristor control,
0 – 255
5.7 #294 Volume during
acceleration
Thyristor control,
0 – 255
5.7 #295 Volume during
deceleration
Electric motor,
0 – 255
5.7 #296 maximum sound
volume
Electric motor,
0 – 255
5.7 #297 lowest speed step
Default Description
30 Time in tenth of a second
255 The volume of steam chuffs at maximum acceleration.
Steam chuffs are played back at less volume (or mut-
1 ed) signifying the reduced power requirement during
deceleration.
After the speed has been reduced, the sound should
30
remain quieter for a specified time
Defines the chuff volume during deceleration
20
(Default: 20 = pretty quiet but not muted).
The brake squeal should start when the speed drops
20
below the specified speed step.
Minimum driving time before brake squeal is played
50
back.
= 1: no stepping effect, continuous ascend
1 > 1: ascending scale according to the corresponding
speed step interval.
40
100
100
100
50
100
100
Internal speed step at which the motor sound becomes
30 audible.
Chap-
CV Denomination Range
ter
Electric motor
sound,
0 – 255
5.7 #298
volume dependent
on speed
Electric motor
sound,
5.7 #299 0 - 100
Sound pitch
dependent on speed
Pseudo
0 – 255
#300
programming
Pseudo
0 – 255
#301
programming
75 – 76
5.3
#302 Load test
0 – 29
3.7 #309 Brake key
0 – 255
5.4 #310 Sound ON/OFF key
Function sound
0 – 29
5.4
#311
ON/OFF key
0 – 29
5.4 #312 Blow-off key
0 – 29,
5.4 #313 Mute key
101 – 129
Mute fade in/out
0 – 255
5.4 #314
time
Random generator
5.1
0 – 255
#315 Z1
5.8
Minimum interval
Random generator
0 – 255
5.8
#316 Z1
Maximum interval
Random generator
0 – 255
5.8
#317 Z1
Playback length
Random generator
5.8
#318 Z2
Minimum interval
Random generator
5.8
#319 Z2
Maximum interval
Random generator
5.8 #320 Z2
Playback length
321- Random generator
5.8
Z3 – Z8
338
0 – 29
5.7
#339 Raising-Key
Default Description
Volume increase dependent on speed.
100
100 Sound pitch increase dependent on speed.
0 For various sound sample mappings.
For "Incremental Programming" of sound CV's
0
75 Automatic load test
Number defines a brake key (Brake curve is defined in
0
CV #349)
8 Number defines a key for sound ON/OFF functions.
Defines an ON/OFF key for sounds that play back with
0 function keys.
= 0: Function sound is always ON.
0 Defines a water blow-off key.
0 Mutes all sounds
= 0 (to 10): minimum time setting of 1 sec.
0
= 11...255: longer "fade" times
Defines the shortest possible interval between two
1
consecutive pulses.
Defines the maximum time interval between two con-
60
secutive pulses
Times the random sound is repeated.
5
= 0: Sound is played back only once.
See Z1
See Z1
See Z1
0 Defines a key to raise the diesel sound