Table of Contents
Advertisement
Decoder-Update-und-Sound-Loading-devices
INSTRUCTION MANUAL
MXULFA (with display)
MXULF (without display),
currently not available
Decoder Update and Sound loading device
MXULF
MXULFA
and
t- and Connection Board
and: Tes
MXTAPV
MXULF, MXULFA
(Software add-on 6)
MXTAPS,
, Test- and Connection boards
MXTAPV testing-and connection board
INSTRUCTION MANUAL .................................................................................................................................................... 1
1.
MXULFA Features .................................................................................................................................................. 2
2.
Technical Data ........................................................................................................................................................ 2
3.
Operating elements of the MXULF/ MXULFA ......................................................................................................... 2
4.
Self-update of the MXULF or MXULFA ................................................................................................................... 4
5.
Decoder software update ........................................................................................................................................ 4
6.
Decoder sound loading ........................................................................................................................................... 5
7.
Synchronous update for accessory decoders MX820, MX821 ............................................................................... 6
8.
Driving operation with MXULFA .............................................................................................................................. 6
9.
Programming/ reading CVs SERV PROG / OP PROG .......................................................................................... 7
10.
Read / program load code ...................................................................................................................................... 7
11.
Decoder-connection board MXTAPS / V ................................................................................................................ 8
12.
Using the MXULF(A) with the computer ............................................................................................................... 10
Annex: Declaration of Conformity and Warranty ................................................................................................................ 12
.
MXTAPS, MXTAPV
Page
EDITIONS:
First delivery in December 2011 - 2011 12 20
until April 2012
SW add-on 2 -- SW version 0.22 - 2012 11 10
SW add-on 3 -- SW version 0.32 - 2012 12 20
SW add-on 4 -- SW version 0.40 - 2013 03 12
SW add-on 5 -- SW version 0.50 - 2013 08 20
0.56.03 - 2013 11 20
Dortmund 2014 edition 2014 04 06
SW version 0.61 --- 2014 05 20
SW add-on 6 - 2015 07 05
SW add-on 0.70 - 2016 08 01
SW version 0.85 - 2020 01 20
Addition MS - 2020 02 20
1
2014 03 13
2014 10 10
2015 01 22
2015 08 24
2015 11 25
2016 03 11
2016 08 18
2016 09 01
2020 06 01
2020 07 30
Advertisement
Table of Contents
Related Manuals for ZIMO MXULF
Summary of Contents for ZIMO MXULF
-
Page 1: Table Of Contents
INSTRUCTION MANUAL ..............................1 MXULFA Features ..............................2 Technical Data ................................ 2 Operating elements of the MXULF/ MXULFA ......................2 Self-update of the MXULF or MXULFA ........................4 Decoder Update and Sound loading device Decoder software update ............................4 Decoder sound loading ............................ -
Page 2: Mxulfa Features
(at first delivery and until software 3, not all display variations were implemented) - SUSI sound loading: via the SUSI plug on the MXULF, sound projects can be loaded a lot faster than the “normal” way: SUSI loading is recommended BEFORE installing the decoder in the train, especially if the LED (track) yellow: found and recognized decoder (i.e. - Page 3 Decoder-Update-und-Sound-Loading devices MXULF, MXULFA Page 3...
-
Page 4: Self-Update Of The Mxulf Or Mxulfa
5. Decoder software update To return to main display: press Key 1. After a few seconds, the MXULF is ready for a new update. Unplug the flash drive if this is not wanted. In case of more than one update file on the flash drive, only the first file is shown in the list. To select one of Via flash drive the other files, open the MXULFA’s menu by pressing the R-key (3 sec) and select “UPDATE &... -
Page 5: Decoder Sound Loading
To return to main display: Press the R-key. After a few seconds, the MXULF is ready for a new update. If there are more of the same sort, the newest is displayed. -
Page 6: Synchronous Update For Accessory Decoders Mx820, Mx821
(Complete: 100% Reset -> R). LED 2 remains yellow. the current procedures for the corresponding family. To return to main display: Press the R-key. After a few seconds, the MXULF is ready for a new loading First decoder family is searched for, found number is displayed ... -
Page 7: Programming/ Reading Cvs Serv Prog / Op Prog
“load code”. This not only depends on the sound project’s author, but also on the The MXULFA not only is a module too update ZIMO decoders, but also to read-out and program CVs. identification number of the decoder. -
Page 8: Decoder-Connection Board Mxtaps / V
After selection by R-key, decoder ID is read out, doesn’t work SERV PROG ID = NO-READ Connections between the MXTAPV and the MXULF: a 2-pole cable to connect the “Schiene”-plug (track; con- SERV PROG LC = Press and hold R-key again to enter load code nectors are supplied with the device) and a 4-pole SUSI cable (supplies;... - Page 9 Decoder-Update-und-Sound-Loading devices MXULF, MXULFA Page 9 The MXTAPS (or MXTAPV) is connected to the output “Schiene” of the MXULF via the double clamp MXTAPV (not MXTAPS) with connected large-scale decoder MX696, connected to MXULFA; on the “SCHIENE”, and to a track output of a ZIMO central command station or another digital command station.
-
Page 10: Using The Mxulf(A) With The Computer
NOTE: On the websites of ZIMO or other software providers you may find newer versions of the pro- grams delivered on the flash drive! Usually, it is not necessary to install the MXULF driver, because it is recognized by Windows like every other USB device. - Page 11 (creation of sound projects, decoder updating, sound loading): in the picture above you see the display during the software update of a sound decoder MX645; MXULF is recognized as MX31ZL (because the MXULF behaves the same). („ZIMO CV Setting“, by Matthias Manhart, http://www.beathis.ch/zcs/index.html):...
-
Page 12: Annex: Declaration Of Conformity And Warranty
The warranty does not apply: - with normal wear and tear - if devices are not used for the purpose intended by ZIMO Elektronik GmbH and in accordance with its operating instructions - in case of modifications or alterations not performed by ZIMO Elektronik GmbH.