Return To Home - XDynamics EVOLVE User Manual

Return to Home

This feature brings the drone back to the location it first acquired a home lock position utilizing the GPS
signal. Ensure GPS signal is fixed before takeoff (when all 4 LED lights located under the motors are
solid green a GPS home lock is achieved) to bring it back to your home point position, when it reaches
the home position the aircraft will hover for 5 seconds then land automatically. During the landing
decent the operator can move the drone's position to clear and obstacles on the ground or land in a
preferred spot. On any stage the RTL mode can be modified by pressing the RTL button again and
confirming the RTL cancel, then the drone will state back into the mode which the 3 position switch
mode is selected.
The number of GPS satellites acquired and the health of the GPS signal can also be checked on the top
screen of the Remote Controller. 6 is the minimum number of satellites needed. The signal health will
be confirmed by a (Excellent / Good / Fair / Poor) message on the APP.
Evolve User Manual V1.0 by XDynamics Limited 23