Return To Home - XDynamics EVOLVE 2 User Manual

AUTO LANDING PROCEDURE
1. Short Press and Long Press the Auto Take Off button
for 3 seconds.
2. Take off dialog will pop up on the screen. Release the
button to cancel action anytime.
3. The Ground Station will voiceover to indicate the
aircraft ready to descent. (during the descent the
operator can reposition the aircraft to clear obstacles
or land in preferred spot )
4. Upon landing, the aircraft will disarm automatically.
After confirming the land operation, the Ground Station will update the status to indicate that the aircraft is landing.

RETURN TO HOME

This feature brings the aircraft back to the location it first acquired a home lock position utilizing the GPS signal. Ensure
GPS signal is fixed before takeoff (when all 4 LED lights located under the motors are solid green a GPS home lock is
achieved) to bring it back to your home point position, when it reaches the home position the aircraft will hover for 5
seconds then land automatically. During the descent the operator can move the aircraft's position to clear away from
obstacles on the ground or land in a preferred spot. At any point during the RTH mode, it can be modified by pressing
the RTH button again and confirming the RTH cancel. The aircraft will then switch back into the mode which the 3-position
switch mode is selected.
The number of GPS satellites acquired and signal strength can
also be checked on the top screen of the Ground Station. The
minimum number of satellites needed is 6. Signal health will be
confirmed by a (Excellent / Good / Fair / Poor) message on the
APP.
EVOLVE 2 User Manual V1.2 by XDynamics Limited 55