Changing The Sound And Display Settings; Cd/Md Changer; Playing A Cd Or Md - Sony CDX-C810DSP Operating Instructions Manual

Changing the sound and
display settings
You can set:
• AMBER/GREEN to change the illumination
color to amber or green.
• BEEP to turn on or off the beeps.
• DIMMER (Dimmer) to change the brightness
of the display.
• D.INFO (dual information) to display the
clock and the play mode at the same time
(ON) or to display the information
alternately (OFF).
• LOUD (Loudness) to enjoy bass and treble
even at low volume. Bass and treble will be
reinforced.
• RM (Rotary Remote) to change the operative
direction of the controls of the rotary remote.
— Select "NORM" to use the rotary remote
as the factory preset position.
— Select "REV" when you mount the rotary
remote on the right of the steering
column.
EN
1
Press (SHIFT), then press (2) (SET UP).
2
Press (2) (SET UP) repeatedly until the
desired setting mode appears.
Each time you press (2) (SET UP), the item
changes as follows:
CLOCK n AMBER/GREEN n BEEP n DIMMER
*
n D.INFO n LOUD
* When you have not tune the station or there is no
CD/MD being played, these items will not appear.
3
Press (4) (n) to select the desired
setting (for example: ON or OFF).
4
Press (SHIFT).
When the mode setting is complete, the
normal playback mode appears.
18
Actual total number:
*
n RM
Sony CDX-C810DSP (
With Optional Equipment

CD/MD Changer

You can control up to 10 CD changers and MD
changers with this unit.

Playing a CD or MD

Press (SOURCE) until the desired
changer appears.
CD/MD playback starts.
When a CD or MD changer is connected, all
the tracks play from the beginning.
Changing the displayed items
Each time you press (DSPL) during CD/MD
playback, the item changes as follows:
$
Elapsed playback time
$
Disc name*
$
Track name*
$
3
Clock*
1 If you have not labeled the CD, "NO Name" appears in
*
the display. If there is no prerecorded name for an MD,
"NO D.Name" appears in the display.
2 If the track name is not prerecorded, "NO T.Name"
*
appears in the display for one second.
3 If the dual information is on, clock does not appear in
*
the display.
Tip
If the name of the MD is too long, you can scroll it across
the display window by pressing (SHIFT), then (1) (N).
Automatically scrolling a disc name
— Auto Scroll
The Auto Scroll function automatically scrolls
the disc or track name of the MD when you
press (DSPL) and the name length exceeds 10
characters.
1
Press (SHIFT), then press (2) (SET UP)
repeatedly until "A.SCRL" appears.
2
Press (4) (n) to select "A.SCRL ON."
To cancel Auto Scroll, select "A.SCRL OFF" in
step 2 above.
E
,F,G,I) 3-856-118-11(2)
1
2