Changing The Sound And Display Settings; Menu - Sony XR-CA610XFP Operating Instructions Manual

Changing the sound and
display settings

— Menu

The following items can be set:
SET (Set Up)
• CLOCK (page 8)
• BEEP — to turn the beeps on or off.
• RM (Rotary Commander) — to change the
operative direction of the controls of the rotary
commander.
– Select "NORM" to use the rotary commander
as the factory-set position.
– Select "REV" when you mount the rotary
commander on the right side of the steering
column.
DSPL (Display)
• D.INFO (Dual Information) — to display the
clock and the play mode at the same time (on).
• M.DSPL (Motion Display) — to select the
Motion Display mode from "1," "2," and
"OFF."
– Select "1" to show decoration lines in the
display and activate Demo display.
– Select "2" to show decoration lines in the
display and deactivate Demo display.
– Select "OFF" to deactivate the Motion
Display.
• A.SCRL (Auto Scroll)*
– Select "ON" to scroll all automatically
displayed names exceeding 8 characters.
– When Auto scroll is set to off and the disc/
track name is changed, the disc/track name
does not scroll.
* When no CD or MD is playing, this item will not
appear.
SND (Sound)
• LOUD (Loudness) — to enjoy bass and treble
even at low volumes. The bass and treble will
be reinforced.
P/M (Play Mode)
• LOCAL-ON/OFF (Local seek mode) (page 10)
– Select "ON" to only tune into stations with
stronger signals.
• MONO-ON/OFF (Monaural mode) (page 10)
– Select "ON" to hear FM stereo broadcast in
monaural. Select "OFF" to return to normal
mode.
• IF AUTO/WIDE (page 10)
1
Press (MENU).
To set A.SCRL, press (MENU) during CD/
MD Playback.
2
Press either side of (DISC/PRESET)
repeatedly until the desired item
appears.
3
Press the (+) side of (SEEK) to select
the desired setting (Example: ON or
OFF).
4
Press (ENTER).
After the mode setting is completed, the
display returns to normal play mode.
Note
The displayed item will differ depending on the source.
Tip
You can easily switch among categories ("SET,"
"DSPL," "SND," "P/M," and "EDIT") by pressing either
side of (DISC/PRESET) for 2 seconds.
15