Selecting The Listening Position; Adjusting The Fader (Fad) - Sony CDX-C810DSP Operating Instructions Manual

Sony operating instructions fm/mw/lw(sw) compact disc player cdx-c810dsp
Hide thumbs Also See for CDX-C810DSP:
Table of Contents

Advertisement

Available languages

Available languages

Erasing the stored surround effect
Press (5) (ENTER) for two seconds in
step 2 of "Registering a surround menu
onto each disc."
D S M
+DELETE+
SUR EQ
PLAY MODE
Selecting the listening
position
You can set the time for the sound to reach the
listeners from the speakers.
The unit can to simulate a natural sound field
so that you can feel as if you are is in the centre
of the sound field wherever you sit in the car.
EN
1
2
3
1
Press (SOUND) momentarily until "POS"
appears.
P O S
All
SUR EQ
2
Press (+) or (–) to select the desired
listening position.
The listening positions appear in the order
shown in the table.
After three seconds, the display goes back
to the normal playback mode.
Adjusting the listening position
1
Press (SOUND) repeatedly until "POS"
appears.
2
Press (+) or (–) to select the desired
listening position appears.
3
Press (SOUND) for two seconds.
P O S
L
SUR EQ
14
Actual total number:
ENTER
Display
Center of
window
soundfield
Normal setting
All
(1 + 2 + 3)
Front part
Front
(1 + 2)
Right front (2)
Front-R
Left front (1)
Front-L
Rear part (3)
Rear
R
Sony CDX-C810DSP (
4
Press (+) or (–) to adjust the centre of
the sound field to the left or right. Then
set the centre of the sound field.
Centre moves to the R (right).
Centre moves to the L (left).
5
Press (4) (n).
P O S
R
SUR EQ
To go back to select the listening position,
press (1) (N).
6
Press (+) or (–) to adjust the centre of
the sound field to the front or rear.
Centre moves to the F (front).
Centre moves to the R (rear).
7
Press (SOUND) for two seconds.

Adjusting the fader (FAD)

Normally, with the DSP mode on, the volume
of the output sound from the rear speakers is
lowered automatically to improve the
efficiency of the listening position setting. If
you want to raise the rear speaker volume,
adjust the fader.
1
Follow steps 1 to 3 of "Selecting a
surround menu" (page 13).
2
Press (SOUND) repeatedly until "FAD"
appears.
3
Press (+) or (–) to adjust the fader.
Increases front speaker volume
Decreases front speaker volume
After three seconds, the display goes back
to the normal playback mode.
E
,F,G,I) 3-856-118-11(2)
F

Advertisement

Table of Contents
loading

Table of Contents