Radio; Memorising Stations Automatically; Best Tuning Memory (Btm); Memorising Only The Desired Stations - Sony CDX-C810DSP Operating Instructions Manual

Erasing the tracks in the
programme
1
Press (SHIFT), then press (3) (PLAY
MODE) for two seconds.
C D
TRACK
SUR EQ
PLAY MODE
"P 1" shows Programme 1 is selected.
To select Programme 2, press (4) (n)
repeatedly until "P 2" appears.
2
Press (1) (N) or (4) (n) to select the
track you want to erase.
C D
TRACK
SUR EQ
PLAY MODE
The track currently registered in slot 6 of
Programme 1.
3
Press (5) (ENTER) for two seconds.
EN
When you erase a track from a slot number,
the succeeding tracks shift up to fill the gap.
D E L
DISC TRACK
- -- P1.‚6
SUR EQ
PLAY MODE
µ
C D
TRACK
SUR EQ
PLAY MODE
4
To continue erasing tracks, repeat steps
2 and 3.
5
When you finish erasing tracks, press (3)
(PLAY MODE) for two seconds.
8
Actual total number:
7 P1.‚8
ENTER
Track slot number
3 P1.‚6
ENTER
ENTER
7 P1.‚6
ENTER
Sony CDX-C810DSP (

Radio

Memorising stations
automatically

— Best Tuning Memory (BTM)

The unit selects the stations with the strongest
signals and memorises them in the order of
their frequencies. You can store up to 10
stations on each band (FM1, FM2, MW and
LW/SW).
Caution
When tuning in the station while driving, use
Best Tuning Memory to prevent accidents.
1
Press (SOURCE) repeatedly to select the
desired band (FM1, FM2, MW or LW/SW).
2
Press (SHIFT), then press (6) (BTM).
The unit stores stations in the order of their
frequencies on the number buttons.
Notes
• The unit does not store stations with weak signals. If
only a few stations are received, some number buttons
remain empty.
• When a number is indicated in the display, the unit
starts storing stations from the one currently displayed.
Memorising only the
desired stations
You can store up to 10 stations on each band
(20 for FM1 and FM2, 10 for each MW and
LW/SW) in the order of your choice.
1
Press (SOURCE) repeatedly to select the
desired band.
2
Press either side of (SEEK/AMS) to tune
in the station that you want to store on
the number button.
3
Keep the desired number button ((1) to
(10)) pressed for two seconds until you
hear a beep tone.
The number button indication appears in
the display.
E
,F,G,I) 3-856-118-11(2)