Listening To Each Programme Source In Its; Registered Surround Mode; Source Sound Memory; Other Functions - Sony CDX-C810DSP Operating Instructions Manual

4
Press (+) or (–) to select the turn-over
frequency.
The turn-over frequencies change as
follows:
Bass:
125 Hz n 157 Hz* n 198 Hz
Treble:
5.0 kHz n 7.1 kHz*
* Factory-set frequency
5
Press (SOUND) for two seconds.
To adjust the volume of the bass and treble,
press (1) (N).
Listening to each
programme source in its

registered surround mode

EN

— Source Sound Memory

You can listen to the same source always in the
surround menu and the sound characteristics
(bass, treble and subwoofer) even after
changing the programme source or turning the
unit on and off again.
16
Actual total number:

Other Functions

Using the rotary remote

The rotary remote works by pressing buttons
and/or rotating controls.
You can control the optional CD or MD
changer with the rotary remote.
By pressing the button (the
SOURCE button)
(SOURCE)
Every time you press (SOURCE), the
source changes as follows:
FM1 n FM2 n MW n LW (SW) n CD1 n
CD2 n MD1 n MD2
Tip
When the POWER SELECT switch is set to position B,
you can turn on this unit by pressing (SOURCE) on the
rotary remote.
By rotating the control (the SEEK/
AMS control)
Rotate the control momentarily and
release it to:
•Locate a specific track on a disc. Rotate
and hold the control to locate the specific
point in a track, then release it to start
playback.
•Tune in the stations automatically. Rotate
and hold the control to tune in the specific
station.
E
Sony CDX-C810DSP ( ,F,G,I) 3-856-118-11(2)