Ot Her Funct Ions; Adjusting The Sound Characteristics; Attenuating The Sound; Changing The Sound And Display Settings - Sony XR-CA300 Operating Instructions Manual

Ot her Funct ions

Adjust ing t he sound
charact erist ics
You can adjust the bass, treble, balance, and
fader.
You can store the bass and treble levels
independently for each source.
1
Select the item you want to adjust by
pressing (SEL) repeatedly.
Each time you press (SEL), the item
changes as follows:
BAS (bass) t TRE (treble) t
BAL (left-right) t FAD (front-rear)
2
Adjust the selected item by pressing
either side of the volume button.
Adjust within three seconds after selecting
the item.
At t enuat ing t he sound
Press (ATT).
After "ATT-ON" momentarily flashes, the
"ATT" indication appears in the display.
To restore the previous volume level, press
(ATT) again.
"ATT-OFF" flashes momentarily.
Tip
When t he int erf ace cable of a car t elephone is
connect ed t o t he ATT lead, t he unit decreases t he
volume aut omat ically w hen a t elephone call comes
in (Telephone ATT f unct ion).
(XR-CA310/ illuminat ion:green only)
Downloaded from: https://www.usersmanualguide.com/
Changing t he sound and
display set t ings
The following items can be set:
• CT (Clock Time) (page 14).
• A.SCRL (Auto Scroll)* (page 17).
• M.DSPL (Motion Display)
– the demonstration mode which appears
when the tape is ejected and no source is
selected (e.g., tuner is turned off).
• BEEP – to turn the beep sound on or off.
1
Press (SEL).
2
Press the preset number button to select
the desired item.
Number buttons
(2): CT
(3): A.SCRL*
(4): M.DSPL
(6): BEEP
* When no CD or M D is playing, t his it em w ill
not appear (XR-CA300/CA310 only).
Note
The displayed it em w ill dif f er depending on t he
source.
3
Press the preset number button
repeatedly to select the desired setting
(Example: ON or OFF).
GB
15