Adjusting The Volume Of The Subwoofer(S); Listening To Each Program Source In Its; Source Sound Memory (Ssm); Creating And Storing Equalizer Curves - Sony WX-C770 Operating Instructions Manual

Adjusting the volume of
the subwoofer(s)
1
Select a source (tuner, tape, CD or MD).
2
Press (SOUND) repeatedly until "Sub.W"
appears.
3
Rotate the dial to adjust the volume.
After three seconds, the display goes back
to the normal playback mode.
Tip
When you rotate the dial to turn the volume all
the way down, "Sub.W off" appears and the
subwoofer is disabled.
Listening to each program
source in its registered
surround mode

— Source Sound Memory (SSM)

You can listen to the same source always in the
same equalizer curve and subwoofer level
even after changing the program source or
turning the unit on and off again.
Note
If an optional TV tuner is connected, "LSM" (Last
Sound Memory) appears on the TV display.
Creating and storing
equalizer curves
You can create and store up to three equalizer
curves (User 1 to User 3).
1
Select a source (tuner, tape, CD or MD
etc.).
2
Press (SOUND) for two seconds.
C D 6 3 H z
+ 12
JAZZ
0
- 12
3
Enter the setting.
1 Press (10) (n) to select the desired
frequencies.
If you press (7) (N), the frequencies
appear in the reverse order.
C D
+
12
JAZZ
0
- 12
2 Rotate the dial to adjust the equalizer
curve.
3 Repeat steps 1 and 2 to adjust
analyzer equalizer curve.
4
Press (6) (ENTER).
C D E Q : U s e r 1
5
Rotate the dial to store the equalizer
curve.
" User 1 " User 2
To cancel, press (SOUND) for two seconds.
6
Press (6) (ENTER).
C D + E n t e r +
7
Press (SOUND) for two seconds.
EN
1 k H z
" User 3
17