Attaching The Iv Bag Strap - Ferno IV Pole User Manual

4.7 Attaching the IV Bag Strap

1. Push the cord loop of the IV bag strap through the hole at the
bottom of the IV pole tip (Figure 8).
2. Pull the cord loop over the IV pole tip (Figure 9), and align the
loop with the groove near the base of the IV pole tip (Figure 10).
3. Pull the other end of the cord loop so that the cord tightens on
the IV pole tip (Figure 11).
4. Reverse this procedure to remove the strap for cleaning.
© Ferno-Washington, Inc. / 00271-V3
Using the IV Pole
8
9
10
11
9