Appendix C: Recommended Test Sequence; C-L - Motorola System 6300 Service Manual

APPENDIX C: RECOMMENDED TEST SEQUENCE
This appendix recommends a test sequence for initial testing of
the System 6300 computer.
1. The default test sequence (d), which consists of the
following tests:
1.
2.
3.
4.
5.
6.
7.
8.
9.
2. Subtests 1, 5, 9, 23, and 24 of the disk tests for both
the hard and floppy disk drives (tests 6 and 8).
3. Line printer test (1), using a line printer connected to
the parallel port.
This sequence is as follows:
Memory Read, Write, and Refresh Test
Map Translation Test
Page Fault Test
Parity Test
Map RAM Test
User Error Test
i/ o
Clock Test
RS-232-C (8274) Test (using the plug described
in the special hardware requirements
in Section 1)
Fast Communication Port Test (using two
machines).
subsection

C-l