Mounting A Host Adapter; Reassembling The Computer - Sony CDU924S User Manual

Mounting a Host Adapter

Install a host adapter in the computer by inserting it securely in a system
expansion slot. Refer to the operating instructions of the host adapter for
complete instructions on its installation and the assignment of its switches.
Note:
If you connect external SCSI device(s), you must remove a host adapter's
terminator resistors.
Floppy disk
drive
CDU924S
18 Installing the Drive Unit into the Computer
Computer
Remove the host
adapter's terminator.
ID No. 7
Host adapter
Attach the terminator to
the last unit in the system.

Reassembling the Computer

1
Tuck the cables behind the drives so that they do not come up above the
power supply.
Check the following before closing the computer:
Are the connections between the drive and computer correct?
Are the switches set to the appropriate positions?
2
Slide the computer's cover on and fasten the cover mounting screws at
the back of the computer.
3
Remount the rear plastic panel, if any.
Power supply
Installing the Drive Unit into the Computer 19