Vent Parts; Power Dry System Removal - GE DDT595SxJ0 Series Technical Service Manual

Vent Parts

Front Control Model (GDF570SxJxx only)
Model GDF570SxJ has a passive vent through the
Control Panel. All other models have a Power Dry
system.
Console Insulation
Gasket
Gasket Vent
Conduit
Power Dry Models
Power Dry Models have a 13.5 VDC fan and
ducting to the bottom of the door. The Power
Dry system must be removed to access the door
and diagnostics will be covered in the Dry System
section of this service guide.
Mounting screw
Vent Duct and Fan
Gasket
Vent Cover
– 36 –

Power Dry System Removal

1. Remove the inner door vent cover.
2. Disconnect the wire harness from the fan to the
UI control.
3. Remove the 1/4 in. hex head screw.
4. The vent conduit, fan and the duct are removed
as an assembly.
Conduit
Fan (Inside duct)
Duct