Racks - GE DDT595SxJ0 Series Technical Service Manual

Racks

Upper Rack
depending on the model: Wheels on Rails or Full
Extension Rails.
Wheels on Rails
To remove the rack from the dishwasher, pull the
rail assembly out a few inches for easier access.
Press the tab on the end cap to the center of the
The rack may now be removed.
Upper Rack Rollers and Brackets
The upper rack roller brackets are locked into place
with a clip. The clip must be removed to remove the
roller brackets from the rack. Press in on the tab and
lift the locking clip.
Tub Rollers
The tub rollers are attached to the tub with a screw
in each roller.
To Remove the Tub Rollers
1. Remove the upper rail by removing the rear end
cap.
2. Remove the T20 Torx screw securing each roller
to the tub.
Tub
Roller
T20 Torx Screw
Model GDF570SGJ upper rack rollers mounted to
the tub are permanently attached to a bracket
which is toxed to the tub assembly. These rollers are
non-replaceable.
– 23 –
Thrust
Tub
Washer
(Continued next page)