WimTec OCEAN S6 Assembly And Operating Instructions Manual page 33

OCEAN S6
Description of the functions
Protection from scalding
DIP switch 5
This function serves to monitor the sensor range during thermal
disinfection.
Thermal disinfection may be accidently aborted if dense steam
forms in front of the shower fitting. If this happens, disable the
function to protect against exposure to scalding water.
DIP switch 5 ON = Function to protect against exposure to scalding
water enabled (default setting).
DIP switch 5 OFF = Function to protect against exposure to scalding
water disabled.
User detection
The infrared sensor monitors
the sensor range of the fitting
during thermal disinfection.
Only possible with models featuring thermal disinfection:
1)
:
1)
Protection against exposure
to scalding water enabled
If someone approaches the
sensor, the flow of water is
immediately stopped and
thermal disinfection is aborted.
Shower control
If possible, this safety
function should always
ON
OFF
1 2 3 4 5 6
WimTec OCEAN S6
EN
Warmlauf:
ON
OFF
1 2 3 4 5 6
Reinigungsstopp:
ON
OFF
1 2 3 4 5 6
Hygienespülung:
ON
!
OFF
1 2 3 4 5 6
Halbautomatik:
ON
be activated.
OFF
1 2 3 4 5 6
Vollautomatik:
ON
OFF
1 2 3 4 5 6
Manuell:
ON
OFF
1 2 3 4 5 6
33