WimTec OCEAN S6 Assembly And Operating Instructions Manual page 32

EN
OCEAN S6
Description of the functions
Warm water rinse:
DIP switch 4
Serves to rinse the warm water pipe without the need for you to
remain within the sensor range of the shower.
DIP switch 4 ON = Warm water rinse function enabled
(default setting).
DIP switch 4 OFF = Warm water rinse function disabled.
User detection
When you step in front of the
shower, the system will detect
you. The illuminating icon
begins to pulse slowly.
30-70 cm
32 Shower control
Switch on
Once the sensor has detected
your presence, you have 5 s to
tap on the ON/OFF icon and
enable the warm rinse function
without having to be in the
sensor range. The vertical dash
of the icon is then illuminated,
while the ring pulsates.
WimTec OCEAN S6
We do not recommend
using the warm water rinse
function in combination
with the fully automatic
Operation
Water will flow for 30 s plus
ON
OFF
1 2 3 4 5 6
the configured shut-off delay
without the need for you to re-
main within the sensor range;
it will then automatically shut
down again.
If you enter the sensor range
for at least 5 s during these
30 s, the shower will switch to
normal operation.
Warmlauf:
ON
OFF
1 2 3 4 5 6
Reinigungsstopp:
ON
!
OFF
1 2 3 4 5 6
Hygienespülung:
ON
OFF
1 2 3 4 5 6
program mode.
Halbautomatik:
ON
OFF
1 2 3 4 5 6
Vollautomatik:
ON
OFF
1 2 3 4 5 6
Manuell:
ON
OFF
1 2 3 4 5 6