WimTec OCEAN S6 Assembly And Operating Instructions Manual page 28

EN
OCEAN S6
Commissioning
18
18.
Open the main water valve.
19. Perform a system test.
Move the hand in front of the infrared sensor until the ON/
OFF icon begins to pulsate. By pressing the ON/OFF icon the
water flow starts. Keap your hand in the active range during
the function test. After leaving the active range the water
flow stops automatically.
28 Shower control
19
WimTec OCEAN S6
In confined conditions, such
as in shower, an adjust-
ment of the range (see
page 23) may be required.
!