Advertisement
Available languages
Available languages
EN
OCEAN S6
General notes
The "General installation
terms and conditions"
provided at
www.wimtec.com apply.
20
Shower control
Congratulations on purchasing the WimTec OCEAN S6.
In order to ensure that you will be able to enjoy this high-quality
product for many years, please take note of the following cleaning
and maintenance recommendations:
Use mild cleaning agents containing soap
Do not use abrasive, scrubbing, nano sealing or acidic
cleaning agents or disinfectants
Clean the fitting with a soft sponge or cloth only
Do not use steam cleaners
Lime deposits on the glass front panel combined with wetness can
impair the touch-tronic function. To ensure proper operation,
we recommend regular cleaning of the glass panel using a
power cleaner.
This manual is valid for the following products:
WimTec OCEAN S6 - 12 V
Glass white
Glass black
WimTec OCEAN S6 - TD 12 V
Glass white
Glass black
Delivery scope:
Safety glass front plate, mounting frame with integrated electronics,
thermostat knob, mounting material and ON/OFF sticker.
Important installation notes:
Mounting and installation may only be performed by a qualified
service provider in accordance with DIN 1988, ÖVE/ÖNORM E8001 and
VDE 0100 Part 701. When planning and installing sanitary
facilities, all relevant local, national and inter-national standards and
provisions must be observed! Provide for 230 V / 12 V power unit
outside of the protected zone.
!
According to the Austrian ÖNORM B 5019, thermal disinfection
requires a minimum temperature of 60 °C for at least 10 min at the
relevant system locations. The operator must ensure that all parts of
the installation (e.g., piping) can withstand the temperatures applied
during thermal disinfection.
WimTec OCEAN S6
Art.No. 112 078
Art.No. 114 614
Art.No. 112 108
Art.No. 114 621
Advertisement
