Advertisement
Available languages
Available languages
OCEAN S6
Assembly
12
15
12.
Correctly align the mounting frame. Apply the included spe-
cial grease to the front of the valve.
13.
Configure the desired functions at the electronics module
(see page 23).
14.
Check the thermostat position – the arrow should be pointing
upwards.
15.
Check the position of the thermostat knob – the locking knob
should be pointing directly upwards.
16.
Insert outlet pipe carefully through the glass plate and apply
some pressure while turning it until it is aligned horizontally.
17.
Place the plastic spacer ring over the outlet pipe towards the
front plate.
13
16
Shower control
14
17
ATTENTION!
Perform the following steps
in the order indicated!
WimTec OCEAN S6
EN
!
27
Advertisement
